1034426J-5/21
Alternate bike direction.
Refer to steps 10 through 14
to load your second bike.
If you have bike to bike
interference when loading
two bikes, adjust trays as
necessary to eliminate
interference between bikes.
Loosen the 4 tray bolts (do
not remove bolts).
Slide the tray left or right.
Retighten the 4 tray bolts.
Both trays can be adjusted.
If necessary adjust tray position to avoid bike to bike interference.
Feed the strap through
the spokes of wheel.
SECURE REAR
WHEEL STRAP.
TIGHTEN REAR
WHEEL STRAP.
Rotate the wheel
slightly, if necessary.
LOAD SECOND BIKE (IF APPLICABLE).
Thread strap through
spokes and insert it into
the slot in the wheeltray.
Pull hard to tighten.
SECURE THE HOOK.
Compress
the hook
against the
wheel by
applying
firm
pressure.
To Next Page
Loading...
