Yale Doorman L3 - Page 27

27
Choose your language
• Press
, enter the master
code, and press
again.
• Press 1
.
• For Finnish, press 1.
• For Swedish, press 2.
• For English, press 3.
• For Russian, press 4.
• Confirm by pressing
.
Doorbell settings
• Press
, enter the master
code, and press
again.
• Press 8
.
• Press 1 to disable doorbell
sounds.
• Press 2 to switch to quiet
sounds.
• Press 3 to switch to loud
sounds.
• Confirm by pressing
.
One-day code
• Press
, enter the master code,
and press
again.
• Press 5
.
• Choose a code (four digits).
• Confirm by pressing
.
• If you want to erase the one-day
code, do not enter the code but
simply press
.
Require access control tag for
locking
• Press
, enter the master code,
and press
again.
• Press 9
.
• Press 3
.
• Press 1 to require locking
confirmation by a tag.
• Press 3 to allow normal locking
of the door.
This function can be used to prevent
unnecessary locking of the door.
Automatic locking
• Press
, enter the master code,
and press
again.
• Press 6
.
• Press 1 to enable automatic
locking.
• Press 3 to disable automatic
locking.
• Confirm by pressing
.
In automatic locking mode, the
door will lock automatically when it
is closed.
Sound settings
• Press
, enter the master
code, and press
again.
• Press 7
.
• Press 1 to disable sounds.
• Press 2 to switch to quiet
sounds.
• Press 3 to switch to loud
sounds.
• Confirm by pressing
.
Yale Home connection mode
• Press
, enter the master code, and press again.
• Press 0
.
The lock can now be connected to the Yale Home app for five
minutes. The function is cancelled if you close the door.
NOTE! Once the lock has been connected to the Yale Home
app, all codes, tags, and settings will be erased. These must be
reconfigured in the Yale Home app.