Yale GDP060VX

Maintenance
CALIBRATION
PROCEDURES
GC/GLC030VX, GC/GLC035VX, GC/GLC040SVX [C809];
GLP/GDP16VX, GLP/GDP18VX, GLP/GDP20SVX (GP/GLP/
GDP030VX, GP/GLP/GDP035VX, GP/GLP/GDP040SVX) [C810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [A910, B910];
GLP/GDP20-35VX (GP/GLP/GDP040-070VX) [B875, C875];
GLC40, 45, 55VX; GLC55SVX (GC/GLC080, 100, 120VX; GC/
GLC080, 100VXBCS; GC/GLC120SVX; GC/GLC120VXPRS)
[E818, F818];
GLP/GDP40VX5/VX6; GLP/GDP45SVX5, GLP/ GDP45VX6; GLP/
GDP50-55VX (GP/GLP/GDP080, 090, 100, 110, 120VX)
[F813, G813, H813, J813];
GLP/GDP60VX, GLP/GDP70VX; (GP/GLP/GDP135VX, GP/GLP/
GDP155VX) [C878, D878, E878];
GLC/GDC60VX, GLC/GDC70VX; (GC/GLC/GDC135VX, GC/GLC/
GDC155VX) [C879, D879, E879, F879];
GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP175VX36, GLP/GDP190VX) [A909, B909];
GLC030-035VX, GLC040SVX [D809];
GLP/GDP16-18VX, GLP/GDP20SVX (GLP/GDP030-035VX, GLP/
GDP040SVX) [D810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [C910];
GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX
(GP/GLP/GDP040VX, GP/GLP/GDP050VX, GP/GLP/GDP060VX,
GP/GLP/GDP070VX) [D875]
This manual contains information that is confidential and/or proprietary to Yale Ma-
terials Handling Corporation, its subsidiaries and/or vendors. Copying or distribu-
tion of any sections of this manual marked "Confidential/Proprietary" is prohibited.
PART NO. 524223780 8000 YRM 1134

Yale GDP060VX Specifications

General

Brand	Yale
Model	GDP060VX
Category	Test Equipment
Language	English

Summary

Safety Precautions Maintenance and Repair

Calibration Procedures

Service Password Entry Calibration

Procedure for entering service password to access calibration menus.

Hydraulic Valve Warm Up and Air Bleed Calibration

Calibrates hydraulic valves by warming up fluid and bleeding air.

Calibration Save and Exit Procedure

Saves calibration results and exits the calibration menu.

Lift Valve Output Calibration

Sets the point where hydraulic flow begins for the lift valve.

Lower Valve Output Calibration

Sets the point where hydraulic flow begins for the lower valve.

Tilt Back Valve Output Calibration

Sets the point where hydraulic flow begins for the tilt back valve.

Tilt Forward Valve Output Calibration

Sets the point where hydraulic flow begins for the tilt forward valve.

Aux 1 Dir A Output Calibration

Sets the point where hydraulic flow begins for Aux 1 Dir A valve.

Aux 1 Dir B Output Calibration

Sets the point where hydraulic flow begins for Aux 1 Dir B valve.

Aux 2 Dir A Output Calibration

Sets the point where hydraulic flow begins for Aux 2 Dir A valve.

Aux 2 Dir B Output Calibration

Sets the point where hydraulic flow begins for Aux 2 Dir B valve.

Aux 3 Dir A Output Calibration

Sets the point where hydraulic flow begins for Aux 3 Dir A valve.

Aux 3 Dir B Output Calibration

Sets the point where hydraulic flow begins for Aux 3 Dir B valve.

Load Weight Zero Point Calibration

Sets the zero point for load weight display calibration.

Loaded Weight Calibration

Calibrates the system for accurate loaded weight readings.

Transmission Valve Calibration

Compensates clutch pack control valve pressure for tolerances.

Electronic Transmission Valve Calibration (Extended)

Calibrates electronic transmission valve for extended functions.

Electronic Transmission Valve Calibration (Extended & Basic)

Calibrates electronic transmission valve for extended and basic functions.

Accelerator Pedal Adjustment (Mazda LPGas)

Adjusts throttle assembly lost motion for proper clutch pack operation.

Hydraulic Pressure Gage Installation

Installs pressure gauge for pressure-based calibration methods.

Travel Speed Calibration

Calibrates travel speed sensor for accurate transmission control.