Yale GLC100

Maintenance
CALIBRATION
PROCEDURES
GC/GLC030VX, GC/GLC035VX, GC/GLC040SVX [C809];
GLP/GDP16VX, GLP/GDP18VX, GLP/GDP20SVX (GP/GLP/
GDP030VX, GP/GLP/GDP035VX, GP/GLP/GDP040SVX) [C810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [A910, B910];
GLP/GDP20-35VX (GP/GLP/GDP040-070VX) [B875, C875];
GLC40, 45, 55VX; GLC55SVX (GC/GLC080, 100, 120VX; GC/
GLC080, 100VXBCS; GC/GLC120SVX; GC/GLC120VXPRS)
[E818, F818];
GLP/GDP40VX5/VX6; GLP/GDP45SVX5, GLP/ GDP45VX6; GLP/
GDP50-55VX (GP/GLP/GDP080, 090, 100, 110, 120VX)
[F813, G813, H813, J813];
GLP/GDP60VX, GLP/GDP70VX; (GP/GLP/GDP135VX, GP/GLP/
GDP155VX) [C878, D878, E878];
GLC/GDC60VX, GLC/GDC70VX; (GC/GLC/GDC135VX, GC/GLC/
GDC155VX) [C879, D879, E879, F879];
GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP175VX36, GLP/GDP190VX) [A909, B909];
GLC030-035VX, GLC040SVX [D809];
GLP/GDP16-18VX, GLP/GDP20SVX (GLP/GDP030-035VX, GLP/
GDP040SVX) [D810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [C910];
GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX
(GP/GLP/GDP040VX, GP/GLP/GDP050VX, GP/GLP/GDP060VX,
GP/GLP/GDP070VX) [D875]
This manual contains information that is confidential and/or proprietary to Yale Ma-
terials Handling Corporation, its subsidiaries and/or vendors. Copying or distribu-
tion of any sections of this manual marked "Confidential/Proprietary" is prohibited.
PART NO. 524223780 8000 YRM 1134

Yale GLC100 Specifications

General

Brand	Yale
Model	GLC100
Category	Test Equipment
Language	English

Summary

Safety Precautions Maintenance and Repair

Calibration Procedures

ProcCal001: Service Password Entry

Procedure for entering service password to access calibration menus.

ProcCal002: Hydraulic Valve Calibration Warm Up and Air Bleed

Procedure to warm up hydraulic fluid and bleed air before calibration.

ProcCal003: Save and Exit

Procedure to save calibration results and exit the calibration menu.

ProcCal004: Lift Valve Output Threshold

Sets lift valve output threshold based on command current.

ProcCal005: Lower Valve Output Threshold

Sets lower valve output threshold based on command current.

ProcCal006: Tilt Back Valve Output Threshold

Sets tilt back valve output threshold based on command current.

ProcCal007: Tilt Forward Valve Output Threshold

Sets tilt forward valve output threshold based on command current.

ProcCal008: Aux 1 Dir A Valve Output Threshold

Sets Aux 1 Direction A valve output threshold.

ProcCal009: Aux 1 Dir B Valve Output Threshold

Sets Aux 1 Direction B valve output threshold.

ProcCal010: Aux 2 Dir A Valve Output Threshold

Sets Aux 2 Direction A valve output threshold.

ProcCal011: Aux 2 Dir B Valve Output Threshold

Sets Aux 2 Direction B valve output threshold.

ProcCal012: Aux 3 Dir A Valve Output Threshold

Sets Aux 3 Direction A valve output threshold.

ProcCal013: Aux 3 Dir B Valve Output Threshold

Sets Aux 3 Direction B valve output threshold.

ProcCal014: Load Weight Zero Point

Sets the zero point for the weight display system.

ProcCal015: Loaded Weight Calibration

Calibrates the system for accurate loaded weight readings.

ProcCal016: Transmission Valve Calibration

Calibrates transmission valve pressure for clutch pack control.

ProcCal016 A: Transmission Valve Calibration-Electronic Extended Function

Calibrates electronic extended transmission valve functions.

ProcCal016 B: Trans. Valve Calibration-Electronic and Electronic Extended Function

Calibrates electronic and extended electronic transmission valve functions.

ProcCal019: Mazda LP and Gas Accelerator Pedal Adjustment

Adjusts accelerator pedal for proper engine control and inching.

ProcCal025: Hydraulic Valve Pressure Gage Installation

Installs a pressure gage for hydraulic calibration procedures.

ProcCal026: Travel Speed Calibration

Calibrates travel speed sensor for accurate transmission control.