Yale GLC040SVX

Maintenance
CALIBRATION
PROCEDURES
GC/GLC030VX, GC/GLC035VX, GC/GLC040SVX [C809];
GLP/GDP16VX, GLP/GDP18VX, GLP/GDP20SVX (GP/GLP/
GDP030VX, GP/GLP/GDP035VX, GP/GLP/GDP040SVX) [C810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [A910, B910];
GLP/GDP20-35VX (GP/GLP/GDP040-070VX) [B875, C875];
GLC40, 45, 55VX; GLC55SVX (GC/GLC080, 100, 120VX; GC/
GLC080, 100VXBCS; GC/GLC120SVX; GC/GLC120VXPRS)
[E818, F818];
GLP/GDP40VX5/VX6; GLP/GDP45SVX5, GLP/ GDP45VX6; GLP/
GDP50-55VX (GP/GLP/GDP080, 090, 100, 110, 120VX)
[F813, G813, H813, J813];
GLP/GDP60VX, GLP/GDP70VX; (GP/GLP/GDP135VX, GP/GLP/
GDP155VX) [C878, D878, E878];
GLC/GDC60VX, GLC/GDC70VX; (GC/GLC/GDC135VX, GC/GLC/
GDC155VX) [C879, D879, E879, F879];
GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP175VX36, GLP/GDP190VX) [A909, B909];
GLC030-035VX, GLC040SVX [D809];
GLP/GDP16-18VX, GLP/GDP20SVX (GLP/GDP030-035VX, GLP/
GDP040SVX) [D810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [C910];
GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX
(GP/GLP/GDP040VX, GP/GLP/GDP050VX, GP/GLP/GDP060VX,
GP/GLP/GDP070VX) [D875]
This manual contains information that is confidential and/or proprietary to Yale Ma-
terials Handling Corporation, its subsidiaries and/or vendors. Copying or distribu-
tion of any sections of this manual marked "Confidential/Proprietary" is prohibited.
PART NO. 524223780 8000 YRM 1134

Yale GLC040SVX Specifications

General

Brand	Yale
Model	GLC040SVX
Category	Test Equipment
Language	English

Summary

Calibration Procedures

Service Password Entry

Procedure to enter service password for accessing menus.

Hydraulic Valve Calibration Warm Up and Air Bleed

Warms hydraulic fluid and bleeds air before calibrations.

Save and Exit

Saves calibration results and exits the process.

Lift Valve Output Threshold

Determines the point at which hydraulic flow begins for lift function.

Lower Valve Output Threshold

Determines the point at which hydraulic flow begins for lower function.

Tilt Back Valve Output Threshold

Determines the point at which hydraulic flow begins for tilt back function.

Tilt Forward Valve Output Threshold

Determines the point at which hydraulic flow begins for tilt forward function.

Aux 1 Dir A Valve Output Threshold

Calibrates output threshold for Aux 1 Dir A valve.

Aux 1 Dir B Valve Output Threshold

Calibrates output threshold for Aux 1 Dir B valve.

Aux 2 Dir A Valve Output Threshold

Calibrates output threshold for Aux 2 Dir A valve.

Aux 2 Dir B Valve Output Threshold

Calibrates output threshold for Aux 2 Dir B valve.

Aux 3 Dir A Valve Output Threshold

Calibrates output threshold for Aux 3 Dir A valve.

Aux 3 Dir B Valve Output Threshold

Calibrates output threshold for Aux 3 Dir B valve.

Load Weight Zero Point

Sets the zero point for load weight measurement.

Loaded Weight Calibration

Calibrates system for accurate weight readings with load.

Transmission Valve Calibration

Compensates for clutch pack control valve pressure.

Transmission Valve Calibration-Electronic Extended Function

Calibrates electronic extended function transmission valve.

Trans. Valve Calibration-Electronic and Electronic Extended Function

Calibrates electronic and extended electronic transmission valve.

Mazda LP and Gas Accelerator Pedal Adjustment

Adjusts throttle assembly for proper engine/transmission control.

Hydraulic Valve Pressure Gage Installation

Installs a pressure gauge for hydraulic calibration methods.

Travel Speed Calibration

Ensures accurate travel speed for truck functions.

Safety Precautions for Maintenance and Repair