Yale GLP080

Maintenance
CALIBRATION
PROCEDURES
GC/GLC030VX, GC/GLC035VX, GC/GLC040SVX [C809];
GLP/GDP16VX, GLP/GDP18VX, GLP/GDP20SVX (GP/GLP/
GDP030VX, GP/GLP/GDP035VX, GP/GLP/GDP040SVX) [C810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [A910, B910];
GLP/GDP20-35VX (GP/GLP/GDP040-070VX) [B875, C875];
GLC40, 45, 55VX; GLC55SVX (GC/GLC080, 100, 120VX; GC/
GLC080, 100VXBCS; GC/GLC120SVX; GC/GLC120VXPRS)
[E818, F818];
GLP/GDP40VX5/VX6; GLP/GDP45SVX5, GLP/ GDP45VX6; GLP/
GDP50-55VX (GP/GLP/GDP080, 090, 100, 110, 120VX)
[F813, G813, H813, J813];
GLP/GDP60VX, GLP/GDP70VX; (GP/GLP/GDP135VX, GP/GLP/
GDP155VX) [C878, D878, E878];
GLC/GDC60VX, GLC/GDC70VX; (GC/GLC/GDC135VX, GC/GLC/
GDC155VX) [C879, D879, E879, F879];
GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP175VX36, GLP/GDP190VX) [A909, B909];
GLC030-035VX, GLC040SVX [D809];
GLP/GDP16-18VX, GLP/GDP20SVX (GLP/GDP030-035VX, GLP/
GDP040SVX) [D810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [C910];
GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX
(GP/GLP/GDP040VX, GP/GLP/GDP050VX, GP/GLP/GDP060VX,
GP/GLP/GDP070VX) [D875]
This manual contains information that is confidential and/or proprietary to Yale Ma-
terials Handling Corporation, its subsidiaries and/or vendors. Copying or distribu-
tion of any sections of this manual marked "Confidential/Proprietary" is prohibited.
PART NO. 524223780 8000 YRM 1134

Yale GLP080 Specifications

General

Model	GLP080
Category	Test Equipment
Type	Gas Leak Detector
Detection Method	Semiconductor Sensor
Sensitivity	50 ppm
Power Source	Battery
Operating Temperature	50°C
Weight	200g

Summary

Calibration Procedures

ProcCal001: Service Password Entry

Enters service password for menu access.

ProcCal002: Hydraulic Valve Calibration Warm Up and Air Bleed

Warms hydraulic fluid and bleeds air from valves/cylinders before calibration.

ProcCal003: Save and Exit

Saves calibration results and exits the calibration routine.

ProcCal004: Lift Valve Output Threshold

Determines the cracking current for the lift valve for proper flow.

ProcCal005: Lower Valve Output Threshold

Determines the cracking current for the lower valve for proper flow.

ProcCal006: Tilt Back Valve Output Threshold

Determines the cracking current for the tilt back valve.

ProcCal007: Tilt Forward Valve Output Threshold

Determines the cracking current for the tilt forward valve.

ProcCal008: Aux 1 Dir A Valve Output Threshold

Determines the cracking current for Aux 1 Direction A valve.

ProcCal009: Aux 1 Dir B Valve Output Threshold

Determines the cracking current for Aux 1 Direction B valve.

ProcCal010: Aux 2 Dir A Valve Output Threshold

Determines the cracking current for Aux 2 Direction A valve.

ProcCal011: Aux 2 Dir B Valve Output Threshold

Determines the cracking current for Aux 2 Direction B valve.

ProcCal012: Aux 3 Dir A Valve Output Threshold

Determines the cracking current for Aux 3 Direction A valve.

ProcCal013: Aux 3 Dir B Valve Output Threshold

Determines the cracking current for Aux 3 Direction B valve.

ProcCal014: Load Weight Zero Point

Sets the zero reference point for the load weight display.

ProcCal015: Loaded Weight Calibration

Calibrates the system for accurate load weight measurements.

ProcCal016: Transmission Valve Calibration

Compensates clutch pack control valve pressure for tolerances.

ProcCal016 A: Transmission Valve Calibration-Electronic Extended Function

Calibrates electronic extended function transmission valves.

ProcCal016 B: Trans. Valve Calibration-Electronic and Electronic Extended Function

Calibrates electronic and extended transmission valves.

ProcCal019: Mazda LP and Gas Accelerator Pedal Adjustment

Adjusts accelerator pedal for proper throttle and clutch operation.

ProcCal025: Hydraulic Valve Pressure Gage Installation

Installs a pressure gauge for pressure-based calibration methods.

ProcCal026: Travel Speed Calibration

Ensures accurate travel speed data for advanced transmission functions.