Yale GLP110

Maintenance
CALIBRATION
PROCEDURES
GC/GLC030VX, GC/GLC035VX, GC/GLC040SVX [C809];
GLP/GDP16VX, GLP/GDP18VX, GLP/GDP20SVX (GP/GLP/
GDP030VX, GP/GLP/GDP035VX, GP/GLP/GDP040SVX) [C810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [A910, B910];
GLP/GDP20-35VX (GP/GLP/GDP040-070VX) [B875, C875];
GLC40, 45, 55VX; GLC55SVX (GC/GLC080, 100, 120VX; GC/
GLC080, 100VXBCS; GC/GLC120SVX; GC/GLC120VXPRS)
[E818, F818];
GLP/GDP40VX5/VX6; GLP/GDP45SVX5, GLP/ GDP45VX6; GLP/
GDP50-55VX (GP/GLP/GDP080, 090, 100, 110, 120VX)
[F813, G813, H813, J813];
GLP/GDP60VX, GLP/GDP70VX; (GP/GLP/GDP135VX, GP/GLP/
GDP155VX) [C878, D878, E878];
GLC/GDC60VX, GLC/GDC70VX; (GC/GLC/GDC135VX, GC/GLC/
GDC155VX) [C879, D879, E879, F879];
GLP/GDP80VX, GLP/GDP80VX9, GLP/GDP90VX (GLP/GDP170VX,
GLP/GDP175VX36, GLP/GDP190VX) [A909, B909];
GLC030-035VX, GLC040SVX [D809];
GLP/GDP16-18VX, GLP/GDP20SVX (GLP/GDP030-035VX, GLP/
GDP040SVX) [D810];
GLC20-35VX (GC/GLC040-070VX, GC/GLC055SVX) [C910];
GLP/GDP20VX, GLP/GDP25VX, GLP/GDP30VX, GLP/GDP35VX
(GP/GLP/GDP040VX, GP/GLP/GDP050VX, GP/GLP/GDP060VX,
GP/GLP/GDP070VX) [D875]
This manual contains information that is confidential and/or proprietary to Yale Ma-
terials Handling Corporation, its subsidiaries and/or vendors. Copying or distribu-
tion of any sections of this manual marked "Confidential/Proprietary" is prohibited.
PART NO. 524223780 8000 YRM 1134

Yale GLP110 Specifications

General

Brand	Yale
Model	GLP110
Category	Test Equipment
Language	English

Summary

Maintenance and Repair Safety Precautions

Yale Forklift Calibration Procedures

Service Password Entry

Procedure for entering service password to access calibration menus.

Hydraulic Valve Calibration Warm Up and Air Bleed

Warms hydraulic fluid and bleeds air for accurate valve calibration.

Save and Exit Calibration

Saves calibration settings and exits the calibration process.

Lift Valve Output Threshold Calibration

Sets the correct output threshold for the lift valve function.

Lower Valve Output Threshold Calibration

Sets the correct output threshold for the lower valve function.

Tilt Back Valve Output Threshold Calibration

Sets the correct output threshold for the tilt back valve function.

Tilt Forward Valve Output Threshold Calibration

Sets the correct output threshold for the tilt forward valve function.

Aux 1 Direction A Valve Output Calibration

Sets the correct output threshold for Aux 1 Direction A valve.

Aux 1 Direction B Valve Output Calibration

Sets the correct output threshold for Aux 1 Direction B valve.

Aux 2 Direction A Valve Output Calibration

Sets the correct output threshold for Aux 2 Direction A valve.

Aux 2 Direction B Valve Output Calibration

Sets the correct output threshold for Aux 2 Direction B valve.

Aux 3 Direction A Valve Output Calibration

Sets the correct output threshold for Aux 3 Direction A valve.

Aux 3 Direction B Valve Output Calibration

Sets the correct output threshold for Aux 3 Direction B valve.

Load Weight Zero Point Calibration

Establishes the zero reference for load weight measurement.

Loaded Weight Calibration Procedure

Calibrates system using known load weights for accuracy.

Transmission Valve Calibration

Compensates clutch pack pressure for valve command tolerances.

Electronic Transmission Valve Calibration

Performs calibration for electronic extended transmission functions.

Electronic Extended Transmission Valve Calibration

Calibrates electronic and extended electronic transmission valves.

Mazda LPGas Accelerator Pedal Adjustment

Adjusts accelerator pedal for optimal engine throttle control.

Hydraulic Valve Pressure Gauge Installation

Installs a pressure gauge for using pressure-based calibration methods.

Travel Speed Calibration

Calibrates travel speed sensor for accurate vehicle performance data.