Status LED: displays
different LED colors to
notify you of the system
status.
Using the system
Contactless Tag reader:
tap your contactless
tag to disarm the system
Full Arm: fully arm the
system. It’s possible to set an exit
delay timer to allow a person to
disarm the system before the
alarm goes off (download the
advanced manual for full
instructions)
Part Arm: Secure your home even when you
are in with zone control, typically used to
protect the ground floor when you are upstairs.
To set-up Partial Arming see Page 17.
Disarm: press the disarm button followed by
your PIN code to disarm the system.
It is possible to set an entry delay timer to
allow you to enter the property and disarm
your system before the alarm is triggered.
(download the advanced manual for full
instructions)
When the alarm is triggered, the system will auto dial pre programmed
telephone numbers. Please download the full user manual to find how
to set up more telephone numbers, use the telecommunication features
and tailor your system to your needs.
7.Using the system
•
When the alarm is triggered the system will auto dial pre-programmed
telephone numbers. Please check programming menu details section to find
how to set up more telephone numbers, use the telecommication features
and tailor your system to your needs.
15
Selection Keys: to navigate
the menu options.
Confirmation Keys: to confirm
or undo the menu options.
To Next Page
Loading...
Need help?
General
