Need help?Do you have a question about the Yale HSA3095 and is the answer not in the manual?
General| Connectivity | Wireless |
|---|---|
| Mobile App | Yes |
| Batteries Included | Yes |
| Tamper Alert | Yes |
| Volume | Adjustable |
| Type | Alarm System |
| Product Type | Security System |
| Power Source | Battery-powered |
| Sensors Included | Motion Detector |
| Features | Siren |
| Installation | DIY Installation |
Overview of the Yale HSA3095 Home-monitoring and Intruder Alarm System.
Web-based service for home monitoring against various threats via text, voice, or email.
Helpline details for advice and problem-solving.
List of all items included in the alarm system package.
Planning how to use home and away arming modes for different scenarios.
Mounting advice for PIR detectors, control unit, siren, and contacts.
Instructions for connecting the control unit and its features.
Detailed instructions for installing batteries in the siren unit.
Instructions for setting user PIN codes and program codes.
How to assign names to users for system events.
Options for mounting devices using adhesive pads or screws.
Instructions for mounting the control unit bracket and unit.
Steps for mounting the PIR detector, including test mode.
Instructions for finding a suitable location and mounting the siren.
Steps for mounting the door/window contact and magnet.
Instructions for mounting the smoke detector using the bracket.
Steps for mounting the flood detector.
Procedure to test the system without triggering a full alarm.
How to test the siren's response when arming/disarming.
Instructions for contacting Intamac to register for the service.
How to connect the alarm system to the telephone line.
Step-by-step guide for arming the system in Away and Home modes.
How to arm the system while bypassing specific sensors.
Procedure to disarm the alarm system.
What happens when a sensor is triggered while the system is armed.
How to silence an active alarm using the PIN code.
How to arm the system even if there are existing faults.
How to view the chronological log of system events.
How the control unit identifies and displays tamper conditions.
How the system indicates low battery levels in detectors.
Adjusting PIN codes, times, sounds, and chime settings.
Adjusting siren duration and delay for alarms.
Configuring keyfob entry and radio jamming detection.
Setting up account number, check-in, and reporting for Intamac service.
Configuring PIR detector behaviour for different alarm scenarios.
Configuring door/window contact behaviour for different alarm scenarios.
Important considerations for detector settings and placement.
Programming and using the keyfob remote control.
Programming and using the keypad remote control.
Procedure for changing siren batteries, including tamper disable.
Steps to change batteries in PIR, contacts, remotes, smoke, flood, and help buttons.
Troubleshooting common problems with the siren's response.
Troubleshooting common problems with PIR detectors and door/window contacts.
Troubleshooting common problems with the control unit's dialling function.
Technical specifications for all system devices and components.
Quick guide on how to stop the alarm.
To Next Page
