To Next PageTo Next Page
Need help?Do you have a question about the Yale YAK-HSA6700 and is the answer not in the manual?
General| Brand | Yale |
|---|---|
| Model | YAK-HSA6700 |
| Category | Security System |
| Language | English |
Optimal positioning for the panic button for accessibility and child safety.
Guidance on placing the siren prominently on an external wall for maximum effect.
Instructions for positioning door/window sensors and magnets within the specified gap.
Information regarding the working distance of the remote key fob.
Tips for mounting PIR detectors to ensure optimal room coverage and avoid false triggers.
Advice on where to position the keypad for convenient access and security.
Details the function of each dip switch on the siren for system configuration.
Step-by-step guide to remove the battery saver tab to activate the keypad.
Instructions for removing the battery saver tab from the door/window contact sensor.
Instructions for removing the battery saver tab from the PIR motion detector.
How to activate the siren's learning mode to add new accessories to the system.
Configuring devices for full or part arming using the siren's dip switches.
General procedure for learning in accessories like PIRs, contacts, and keypads.
Procedure to exit the siren's learn mode after programming devices.
Instructions on using dip switch 2 to manage interference detection sensitivity.
Essential step to prevent false alarms by disabling the siren's tamper switch.
Detailed steps for securely mounting the siren unit onto a wall.
How to test if the siren's tamper switch is correctly pressed after mounting.
Guidance on mounting the keypad and performing range tests for other devices.
Step-by-step instructions for mounting the PIR motion detector on various surfaces.
How to correctly position the sensor and magnet for the door/window contact.
Instructions for attaching the contact sensor using adhesive pads or screws.
Guide to changing the default PIN code for enhanced security.
How to arm the system using the keypad, with confirmation signals.
Procedure for setting the alarm to partially arm, e.g., when occupants are home.
Steps to disarm the system using the keypad and the correct PIN.
What to do when a tamper alarm is triggered and how to silence the siren.
How the system indicates if a previous alarm event has occurred.
Instructions on accessing different operational modes via the keypad.
Process for adding extra accessories like PIRs and contacts after initial setup.
Steps to reset the siren to its original factory settings, clearing accessories.
Detailed guide for replacing the batteries in the siren unit.
Instructions for swapping out the batteries in the PIR motion detector.
Guide to replacing the coin cell battery in the door/window contact sensor.
Steps for changing the AA batteries in the alarm keypad.
Important safety warnings and advice for handling batteries and components.
Information on accessing Yale's online support resources and customer service contact.
