6
16
Connecting to the Intamac Home Monitoring
TM
service
Connect to the online home monitoring and messaging service, with your free
12 months subscription.
Call or register online with Intamac
Telephone Intamac on 0845 230 0708 during
working hours (Mon-Thurs 9am-5pm, Fri 9am-4pm)
or register online. You will need to provide the
information listed in the Intamac home user guide
Registration Information Table on page 3
Upon verification, Intamac will then provide you
with your account number and a password/username
to log onto your secured Internet area.
To complete the connection to the Intamac Home
Manager“ service you will need to input your
account number into the control unit.
1 Press #.
2 Enter Program Code.
3 Press OK.
4 Select General Settings.
5 Scroll down using arrow keys to Acc. Numbers.
6 Press OK.
7 Insert your unique account number.
8 Press OK.
9 Scroll down to Rpt On/Off.
10
Press OK.
11
Select Reporting On.
12
Press OK.
Please r
efer to the Intamac Home Manager“
user guide on how to make full use of this service
and if the connection has been successfully made.
Connecting your alarm - Telephone connection
A telephone lead and 2-way adaptor is included
so you can have your telephone and the control unit
connected to the telephone network at the same
time.
1 Plug the 2-way adaptor
into the telephone wall
socket.
2 Plug one end of the
telephone lead into the
control unit and the
other end into the
adaptor.
3 Plug your telephone
into the 2-way adaptor.
¥ The control unit will not be able to telephone out
if any handsets are accidently left off, or if
someone is ringing in.
¥ If you are using an answer machine on the same
telephone line as the system please ensure that
the answer machine is not set to respond to
incoming calls on the first ring.
¥ If you do not wish to use the monitoring features
of the system it is not necessary to connect the
telephone lead to the control unit.
To Next Page
Loading...
Need help?
General
