Yale Keyfree Connected

Smart Home
21
Disconnecting from a Home Automation System
For security reasons a lock will not connect to a new home automation system if it is linked to another. If you have
changed your home automation system please run through the disconnecting settings before adding the new one.
Enter the master code,
followed by # key
You are now in the lock’s menu, option 4
contains the home automation settings
If you have forgotten the master code
please see the resetting the lock
section of the manual.
Press any button
Press any button on the keypad to
begin
Press the [4] button followed by
# key
This will disconnect the lock from the
previous system
Press the [2] button followed by
the hash key
Step Icon Expected Feedback Description
Smart Home
2 tone beep
2 tone beep
2 tone beep. Completed.