Contents [ hide
1 MUST READ
2 Register Controller
3 Delete Controller
4 Resetting Lock to Factory Default
5 User Code Registration (4 ~10 digits)
6 User Fingerprint Registration (Upto
20ea)
7 Unlocking Door with Code
8 Unlocking Door with Card Key
9 File Downloads
10 Related Manuals
MUST READ
This Product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other
manufacturers and/or other applications.
All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the
network.
This product(YDM4109+) is a Security Enabled Z-Wave Plus Product.
Security Enabled Z-Wave Controller must be used in order to fully utilize this product.
Network Module Setting : This setting becomes available through the Main Menu and allows the lock to connect with
Controllers.
Reset locally : Z-Wave Module exclusion
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
* You can find the Security 2 DSK information on the product as shown below.
Association Command Class
* Association Group
This product supports ONE association Group.
Group is the Lifeline Group.
It can contain up to 1 nodes.
* S2 Security CCs and security level
To Next Page
Loading...
