Yale Assure Lock YRC256

1
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Retrofitting or modifying this product may impact fire rating, safety features and warranty.
Consult with code specifications to ensure compliance with all codes and ratings.
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
4" Shown - 5.5" Available
Inside
of Door
Outside
of Door
Yale
®
Assure Lock
®
Interconnected Key Free Touchscreen
Installation and Programming Instructions
(YRC256/YRC652)
®
Smart Module
(Optional)

Yale Assure Lock YRC256 Specifications

General

Battery	4 AA batteries
Auto-Lock	Yes
Backup Key	No
Connectivity	Bluetooth
Compatibility	Amazon Alexa, Google Assistant
Voice Assistant Support	Yes (Alexa, Google Assistant)
Power Source	Battery Powered
Re-keyable	Yes
Material	Metal
User Codes	Up to 250
Finish	Satin Nickel
Keypad	Yes, illuminated

Summary

Mark Door Reference Lines

1 Preparing Door (if necessary)

2 Installing Strike Plates

Determining Handing

3 Changing Handing (if necessary)

Lockset Handing Configurations

Test Lever and Thumbturn

4 Installing Fire Cup

5 Adjusting Deadbolt Latch

6 Installing Deadbolt Latch & Latchbolt

7 Installing Exterior Deadbolt

8 Installing Lock Chassis

9 Securing Back Plate to Door

Testing Latchbolt Operation

10 Attaching the Cable Assembly

11 Installing Interior Lock

12 Installing Interior Lever

Testing Final Latchbolt Operation

Testing Final Deadbolt Operation

13 Installing Optional Smart Module

14 Installing Batteries & Cover

Handing the Lock

Hardware Troubleshooting

Bolt will not extend and lock jam alarm occurs

Resolving issues where the bolt fails to extend or lock jams.

Door is binding

Addressing problems caused by door or frame misalignment.

Bolt will not deadlock

Diagnosing and fixing issues with the deadbolt not fully extending.

Bolt does not extend or retract smoothly

Ensuring smooth movement of the deadbolt mechanism.

Keypad numerics are scrolling

Troubleshooting scrolling numbers on the keypad display.

Programming Instructions

Exterior Escutcheon

Overview of the exterior keypad and components.

Interior Escutcheon

Overview of the interior lock mechanism and components.

Lock Activation

Understanding how to activate and use the lock.

1 Creating Master PIN Code

2 Creating User PIN Codes

3 Unlocking Door with PIN Code

Code Chart

Resetting Lock to Factory Default

Factory Settings

Definitions

Feature Programming Through Menu Mode Using Master PIN code*

Programming Troubleshooting

Lock does not respond - door is open and accessible.

Addressing unresponsive touchscreen when door is accessible.

Lock does not respond - door is locked and inaccessible.

Troubleshooting unresponsive lock when door is inaccessible.

Unit is on for a while then shows no reaction. Lights dim.

Diagnosing issues with intermittent power and dim lights.

Unit chimes to indicate code acceptance, but the door will not open.

Resolving chime confirmation without door unlocking.

Unit operates to allow access, but will not automatically re-lock.

Fixing the auto re-lock feature not engaging.

PIN codes will not register.

Troubleshooting issues with registering new PIN codes.

Upon entering a PIN code and pressing key, the unit displays invalid code error or lock times out with-out responding.

Resolving invalid code errors or timeouts during PIN entry.

Upon entering a PIN code and pressing the key, the red padlock icon appears and there are different tones.

Interpreting error messages and tones after PIN entry.

The unit operates, but it makes no sound.

Troubleshooting the lock operating without audible feedback.

The unit responds Low Battery

Addressing the "Low Battery" alert and battery replacement.

Upon entering a PIN code and pressing the key, the unit responds Wrong number of digits.

Resolving errors related to incorrect digit entry.

FCC Compliance

Industry Canada Compliance

Z-Wave Plus v2 System Integrators Guide

Network Operations

Operations related to adding and managing the lock on a Z-Wave network.

EnrollAdd device to network (SmartStart)

Adding devices to the Z-Wave network using the SmartStart feature.

EnrollAdd device to network (Classic Inclusion Mode) for Assure Lock

Adding Assure Lock devices via Classic Inclusion Mode.

EnrollAdd device to network (Classic Inclusion Mode) for Assure 2 Lock

Adding Assure 2 Lock devices via Classic Inclusion Mode.

Un-enrollRemove device from network (Exclusion Mode)

Removing devices from the Z-Wave network using Exclusion Mode.

Factory Reset

Resetting the Z-Wave module to factory default settings.

Supported Command Classes

Overview of Z-Wave command classes supported by the lock.