Yale Assure Lock YRC652

1
P/N YRL-EMICL-256-KFTSINSTL-FUL Rev A
Retrofitting or modifying this product may impact fire rating, safety features and warranty.
Consult with code specifications to ensure compliance with all codes and ratings.
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
4" Shown - 5.5" Available
Inside
of Door
Outside
of Door
Yale
®
Assure Lock
®
Interconnected Key Free Touchscreen
Installation and Programming Instructions
(YRC256/YRC652)
®
Smart Module
(Optional)

Yale Assure Lock YRC652 Specifications

General

Brand	Yale
Model	Assure Lock YRC652
Category	Door locks
Language	English

Summary

Preparing Door

Installing Strike Plates

Changing Handing

Installing Fire Cup

Adjusting Deadbolt Latch

Installing Deadbolt Latch & Latchbolt

Installing Exterior Deadbolt

Installing Lock Chassis

Securing Back Plate to Door

Attaching the Cable Assembly

Installing Interior Lock

Installing Interior Lever

Testing Final Latchbolt Operation

Testing Final Deadbolt Operation

Installing Batteries & Cover

Hardware Troubleshooting

Bolt will not extend and lock jam alarm occurs

Addresses issues with bolt extension and jamming alarms.

Door is binding

Bolt will not deadlock

Troubleshooting deadbolt not engaging properly with the jamb.

Bolt does not extend or retract smoothly

Programming Instructions

Creating Master PIN Code

Creating User PIN Codes

Unlocking Door with PIN Code

Resetting Lock to Factory Default

Feature Programming Through Menu Mode

Programming Troubleshooting

Lock does not respond - door is open and accessible.

Lock does not respond - door is locked and inaccessible.

Unit chimes to indicate code acceptance, but the door will not open.

Unit operates to allow access, but will not automatically re-lock.

PIN codes will not register.

Solutions for PIN code registration failures.

Upon entering a PIN code and pressing key, the unit displays invalid code error or lock times out with-out responding.

Troubleshooting invalid code errors or timeouts.

Upon entering a PIN code and pressing the key, the red padlock icon appears and there are different tones.

Upon entering a PIN code and pressing the key, the unit responds Wrong number of digits.

Correcting "Wrong number of digits" error.