15
ENGLISH
Normal mode
Configuration
User Code Registration
(4 ~10 digits)
Make sure to leave the door open when registering User Code and Fingerprints because you may accidentally
lock the door while trying to register or change a credential.
The previously registered User Code will automatically be deleted when a new credential is registered.
It is recommended to change User Code on a regular basis.
Caution
User Fingerprint Registration
(Up to 20ea)
Press
(Registration)
button.
1
Enter New User Code.
2
Press
(Registration)
button.
3
User Code Registration(4 ~10) - Only One User Code
U
Complete
Continue
Complete
U
User Fingerprint Registration - Up to 20ea
3times
Press
(Registration)
button.
1
Enter the [ ] Wake
up button on the
keypad.
2
After opennig the
cover, swipe your
finger 3 times through
the fingerprint sensor
followed by the voice
guide.
3
Enter the [ ] Wake up
button on the keypad
to continue.
4
Press (Registration)
button to complete.
4
It is impossible to make same number for Master code / Visitor code /Onetime code/User code.
To Next Page
Loading...
