EasyManua.ls Logo

Yale Z-Wave Plus v2 - User Manual

Yale Z-Wave Plus v2
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AYRMODZW34MNL0050
ISL000000000
We’re here to help, 24/7 18552135841 support@yalelock.com support.shopyalehome.com
Smart Module Installation
ZWave Plus
™
v2 Assure Lock
®
2
Models: YRD410, YRD420, YRD430, YRD450, YRD420F, YRD450F
If your lock is already installed,
remove the batteries.
Insert the Yale ZWave Plus™ v2
Smart Module into the battery
compartment slot.
Reinsert the batteries.
Open the Yale Access App and
navigate to your lock model.
3a. Select ‘Lock Settings’.
3b. Select ‘Yale Smart Module’.
3c. Follow steps in the app
to complete set-up.
To remove the Yale ZWave Plus™ v2
smart module from your system,
select the disconnect ZWave™
option from lock settings
in the Yale Access App.
1 2 3 4
NOTE: Anytime you add or remove a Smart Module from your lock, the batteries must be removed.
Anytime you add or remove a
Smart Module from your lock,
the batteries must be removed
Smart Module Installation
ZWave Plus
™
v2 Assure Lock
®
Models: YRD216, YRD226, YRD256, YRL226, YRL216
If your lock is already installed,
remove the batteries.
Insert the Yale ZWave Plus™ v2
Smart Module into the battery
compartment slot.
Reinsert the batteries.
If you have SmartStart enabled
with your ZWave™ system,
follow in-app prompts to add a
new device. If you do not have
SmartStart or are not sure,
follow the steps below.
3a. Enter your locks master entry
code, followed by the
3b. Press the 7 key followed by
the
3c. Press the 1 key followed by
the
To remove the ZWave Plus™ v2
Smart Module from your system,
open the smart home
or alarm app and follow the
instructions for removing a device.
4a. Enter your locks master entry
code, followed by the
4b. Press the
7 key followed by the
4c. Press the 1 key followed by the
1 2 3 4
Anytime you add or remove a
Smart Module from your lock,
the batteries must be removed
If prompted,
scan QR code

Table of Contents

Questions and Answers

  • D
    Danielle GonzalezAug 17, 2025
    What to do if my Yale Door lock does not respond?
    • C
      Chelsea LindseyAug 17, 2025
      If your Yale door lock isn't responding, here are a few things to try: * Press the Yale logo to activate the keypad. * Make sure you're making good contact with the logo. * If the keypad numbers are visible, see if they respond when pressed. * Check that the batteries are installed correctly in the battery case and replace them if needed. * Ensure the keypad wire is fully connected and not pinched.
  • S
    Steven SantosAug 20, 2025
    Why does my Yale Door lock respond “Low Battery”?
    • C
      craigreevesAug 20, 2025
      If your Yale door lock is responding with a “Low Battery” message, replace all four batteries with new AA alkaline batteries.
  • C
    cflowersAug 22, 2025
    What to do if Yale Door lock is on for a while then shows no reaction and lights dim?
    • N
      Nicole ReedAug 22, 2025
      If your Yale door lock is on for a while then shows no reaction and the lights dim, the batteries may not have enough power. Replace the batteries.
  • K
    Kathryn WoodAug 25, 2025
    Why won't my Yale Door lock entry code register?
    • Y
      yhamiltonAug 26, 2025
      If your Yale door lock entry code will not register, try the following: * If the low battery indicator is lit, replace the batteries. * Verify that your entry code consists of 4 to 8 digits. * Make sure you are using different entry codes for different users. * Ensure the entry code is entered while the keypad is active (tap on the Yale logo to wake it up and enter the entry code within 5 seconds).
  • W
    William VangAug 27, 2025
    What to do if my Yale Door lock operates to allow access but will not automatically lock?
    • B
      Brenda ChanAug 27, 2025
      If your Yale door lock operates to allow access but will not automatically lock, check to see if Auto-Lock is enabled. You can also disable Auto-Lock to lock the door manually.
  • T
    todd08Aug 30, 2025
    What does it mean if my Yale Door lock responds “Wrong Number of Digits”?
    • U
      umichaelAug 30, 2025
      If your Yale door lock responds “Wrong Number of Digits” upon entering an entry code and pressing the Check key, it means the digits entered were incorrect or incomplete. Re-enter the correct code followed by the Check key.
  • R
    rkimSep 1, 2025
    What to do if my Yale Door lock displays “Invalid Code” error?
    • B
      Brian CarrollSep 1, 2025
      If your Yale door lock displays an “Invalid Code” error or times out without responding after entering an entry code and pressing the Check key, verify the entered code is a valid, previously programmed, 4 to 8 digit code. Also, check if vacation mode might be on. Only an admin user can switch vacation mode to normal in the app.
  • D
    David RiveraSep 4, 2025
    What to do if my Yale Door lock chimes but the door won't open?
    • B
      brian42Sep 4, 2025
      If your Yale door lock chimes indicating code acceptance but the door will not open, check for any foreign objects between the door and frame. Also, check that the wire is firmly connected to the interior lock.
  • C
    Charles McgeeSep 6, 2025
    How to fix Yale Door lock that doesn't unlock with fingerprint?
    • K
      Kelly SchultzSep 6, 2025
      If your Yale door lock does not unlock with your fingerprint, verify that you’re using a registered finger and make sure the finger you’re using is clean and dry.
  • W
    walldonnaSep 9, 2025
    What to do if my Yale Door lock does not respond and the door is locked?
    • P
      Patrick YoungSep 9, 2025
      If your Yale door lock does not respond and the door is locked and inaccessible, the batteries may not have enough power, so replace them. You can also use the mechanical key to unlock the door.

Yale Z-Wave Plus v2 Specifications

General IconGeneral
TypeSmart Lock
Lock TypeDeadbolt
ConnectivityZ-Wave
Wireless ProtocolZ-Wave Plus
Power SourceBattery
Power4 AA batteries
Battery LifeUp to 1 year
KeypadYes
Auto-LockYes
Backup KeyYes
Z-Wave Frequency908.42 MHz
Operating Temperature-40°F to 140°F (-20°C to 60°C)
CompatibilityZ-Wave hubs
Remote AccessYes (via Z-Wave hub)
Voice ControlYes (via compatible hub)
AlarmYes
FinishSatin Nickel

Related product manuals