YDM3109+
MUST READ
- This Product can be included and operated in any Z-Wave network with other Z-Wave certified
devices from other manufacturers and/or other applications.
All non-battery operated nodes within the network will act as repeaters regardless of vendor to
increase reliability of the network.
- This product(YDM3109+) is a Security Enabled Z-Wave Plus Product.
- Security Enabled Z-Wave Controller must be used in order to fully utilize this product.
- Network Module Setting : This setting becomes available through the Main Menu and allows the
lock to connect with Controllers.
- Reset locally : Z-Wave Module exclusion by compulsion.
Only use this when the existing Z-Wave controller is missing or inoperable.
Register
Delete
Continue
Complete
Controller
Register Controller
Continue
Complete
U
Reset Locally
Information about association group
- Grouping: 1 available / Group identifier: 1 / Device per group: 1 device
S2 Security CCs and security level
Add
(Include)
Remove
(Exclude)
Reset
Locally
Note
Secure
Secure
Secure
Secure
Secure
Secure
Secure
Secure
Secure
Alarm
Association
Association Group Info
Battery
Device Reset Locally
Door Lock
Door Lock Logging
Manufacturer Specific
Powerlevel
Schedule Entry Lock
Security
Security 2
Supervision
Time
Time Parameter
Transport Service
User Code
Version
Z-Wave Plus Info
Ver.
1
2
1
1
1
2
1
2
1
Note
Secure
Non Secure
Non Secure
Secure
Secure
Secure
Non Secure
Secure
Secure
Non Secure
Ver.
3
1
1
1
2
1
2
1
2
2
Command Class
Command Class
Alarm Report
- Alarm Type: 0x21 with Alarm Level: 0xFF is only sent when device reset locally menu(”PIN#4#0#”) is entered.
To Next Page
Need help?
General
