Yale Assure Lock YRC226

1
P/N - - - Rev GYRL EMICL TSINSTL FUL
Retrofitting or modifying this product may impact fire rating, safety features and warranty.
Consult with code specifications to ensure compliance with all codes and ratings.
Yale Assure Lock
®®
Installation and Programming Instructions
(YRC226/YRC426/YRC620)
Electronic Interconnected Touchscreen
®
Network Module
(Optional - Not
available on
YRC620)
Before you begin
for step-by-step installation
instructions & to register
your product
DOWNLOAD
THE BILT APP
4" Touchscreen Shown - 5.5" Available
Inside
of Door
Outside
of Door

Yale Assure Lock YRC226 Specifications

General

Brand	Yale
Model	Assure Lock YRC226
Category	Locks
Language	English

Summary

Before You Begin

Mark Door Reference Lines

Prepare Door for Installation

Install Strike Plates

Determine and Change Door Handing

Lockset Handing Configurations and Lever Test

Visual guide to handing and testing lever/thumbturn after adjustment.

Install Fire Cups

Adjust and Install Deadbolt

Install Interior Lock Components

Install Lock Chassis and Secure Back Plate

Mounting the main lock chassis and securing the back plate to the door.

Install Interior Lever

Attaching the interior lever and confirming its secure fit.

Test Lockbolt Operations

Test Final Latchbolt Operation

Final check of the latchbolt's movement and engagement.

Test Final Deadbolt Operation

Final confirmation of the deadbolt's locking and unlocking mechanism.

Manage Power and Connectivity

Attach Cable Assembly and Install Batteries

Connecting internal cables and inserting batteries for powering the lock.

Install Optional Network Module

Guide for installing an optional network module for smart home integration.

Program Lock Settings

Create Master PIN Code

Establishing the primary Master PIN code for programming and access.

Create User PIN Codes

Adding, managing, and deleting user-specific access PIN codes.

Unlock Door with PIN Code

Process for unlocking the door by entering a valid PIN code.

Model-Specific Programming

YRC620 Feature Programming

Detailed feature programming menus for YRC620 models using the master PIN.

Troubleshooting and Maintenance

Programming Troubleshooting

Addressing and resolving errors encountered during lock programming.

Replace Lock Cylinder

Step-by-step guide for removing and replacing the lock cylinder.

Reset Lock to Factory Default

Procedure to revert the lock's settings to the original factory configuration.

Z-Wave Integration Guide

Add Z-Wave Module to System

Steps to integrate the Z-Wave module with the lock and smart home system.

Remove Z-Wave Module from System

Procedure for uninstalling the Z-Wave module from the lock.

Z-Wave Product Details

Supported Z-Wave Command Classes

List of all Z-Wave command classes compatible with the device.

Z-Wave Association and Notification Tables

Details on device associations, commands, and notification events.

Configurable Z-Wave Parameters

Overview of programmable parameters for Z-Wave functionality.