To Next PageTo Next Page
Need help?Do you have a question about the Yale Assure Lock Lever Push Button YRL216 and is the answer not in the manual?
Lists standard tools required for lock installation and specialized tools for door preparation.
Details required door dimensions including backset, diameter, and thickness for proper installation.
Explains how to identify door handing for inswinging and outswinging doors.
Ensures the latchbolt curve correctly contacts the strike plate for smooth operation.
Guides on drilling correct diameter and depth holes for the lockset and strike plate.
Instructions for fitting the door latch and the strike plate into the door and frame.
Details on mounting the exterior push button assembly onto the door, noting orientation.
Steps to attach the interior mounting plate securely to the door.
Guide for connecting the interior lock mechanism to the exterior keypad via the cable.
Instructions for securing the interior lock assembly onto the mounting plate.
Steps for inserting the exterior cylinder and key mechanism into the lock.
How to attach the exterior lever handle, ensuring the pin is pressed correctly.
Steps to mount the interior lever handle, pressing the pin to avoid damage.
Verifies the correct functioning of the interior thumbturn for locking and unlocking.
Checks the mechanical key's ability to operate the lock securely.
Instructions for installing a network module, if included, with reference to separate documentation.
Final steps for inserting batteries and securing the interior battery cover.
Verifies the keypad functionality for entering codes to operate the lock.
Procedure to restore the lock to its original factory settings and clear all codes.
Addresses common issues with lock components and their solutions.
Instructions on how to remove and install a new lock cylinder.
Explains various lock settings, their default values, and definitions.
Overview of the push button keypad, low battery indicator, and other external components.
Details the interior lock components including speaker, indicator light, and thumbturn.
Step-by-step guide to setting up the essential Master Entry Code for programming.
Procedure for adding new user codes for access, with limits specified.
Instructions for removing individual or all user entry codes from the lock.
How to use an entry code to unlock the door.
Guide to navigating the settings menu to adjust features like Auto Re-lock and Audio Mode.
Steps to install and connect a Z-Wave Plus Smart Module to the lock system.
Procedure for disconnecting and removing the Z-Wave Plus Smart Module from the lock.
Instructions for physically installing the ZigBee module into the lock's battery compartment.
Guides for adding (enrolling) or removing (unenrolling) the ZigBee module from the network.
General