Yale Assure Lock YRD622

P/N YRD226-MNL-0001 Rev J
Part of ASSA ABLOY
1
Failure to follow these instructions could result in damage to the product, voiding the factory warranty and could lead to failure of the product to provide access.
Yale Assure Lock
®
®
Touchscreen Deadbolt
Installation and Programming Instructions
(YRD226/YRD620/YRD622)
This manual will walk you through all the required steps to add your new
Yale Assure Lock to your door.
• Remove existing deadbolt
• Double check door measurements
• Install your Assure Lock
• Program your Assure Lock
• Add your Assure Lock to your smart home system or Yale
Access app if purchased with Yale Smart Module or Yale Access
Upgrade Kit
Before you begin
Using the app on your smart
phone, scan this QR for step-by
-step installation instructions & to
register your lock
DOWNLOAD
THE BILT APP
Tools Needed
Standard
Phillips Head
Screwdriver
Tools Needed For New
Doors Or Adjusting Existing Door
Utility
Knife
Drill
Wood
Mortise
Chisel
Pencil
Tape
Measure
Level

Yale Assure Lock YRD622 Specifications

General

Brand	Yale
Model	Assure Lock YRD622
Category	Locks
Language	English

Summary

Remove Existing Deadbolt

Remove Existing Deadbolt

Step-by-step guide to safely remove the old deadbolt from the door.

Install Deadbolt and Strike Plate

Install Deadbolt Mechanism

Mounting the deadbolt mechanism, ensuring correct orientation and retracted bolt position.

Install Touchscreen Keypad

Mounting the Keypad

Attaching the touchscreen keypad to the door, verifying hole size and cable connection.

Install Inside Mounting Plate

Attach Mounting Plate

Securing the inside mounting plate using screws, with consideration for cable routing.

Attach and Route Cable

Install Inside Lock Unit

Mounting the Inside Lock

Securing the main inside lock assembly and verifying thumbturn verticality.

Install Batteries and Cover

Powering the Lock

Using Your Lock Features

Create Master Entry Code

Setting Up Master Code

Procedure for creating the Master Entry Code, essential for other programming tasks.

Create User Entry Codes

Adding New Entry Codes

Delete Entry Codes

Removing User Codes

Customize YRD226 Settings

YRD226 Settings Menu Configuration

Customize YRD620 YRD622 Settings

YRD620 YRD622 Settings Menu Configuration

Troubleshooting Guide

Troubleshooting Lock Responsiveness and Codes

Hardware Troubleshooting

Deadbolt and Strike Plate Alignment Issues

Reset Lock to Factory Defaults