Yale Z-Wave Plus v2 Installation Instructions

AYRMODZW34MNL0050
ISL000000000
We’re here to help, 24/7 18552135841 support@yalelock.com support.shopyalehome.com
Smart Module Installation
ZWave Plus
™
v2 Assure Lock
®
2
Models: YRD410, YRD420, YRD430, YRD450, YRD420F, YRD450F
If your lock is already installed,
remove the batteries.
Insert the Yale ZWave Plus™ v2
Smart Module into the battery
compartment slot.
Reinsert the batteries.
Open the Yale Access App and
navigate to your lock model.
3a. Select ‘Lock Settings’.
3b. Select ‘Yale Smart Module’.
3c. Follow steps in the app
to complete set-up.
To remove the Yale ZWave Plus™ v2
smart module from your system,
select the disconnect ZWave™
option from lock settings
in the Yale Access App.
1 2 3 4
NOTE: Anytime you add or remove a Smart Module from your lock, the batteries must be removed.
Anytime you add or remove a
Smart Module from your lock,
the batteries must be removed
Smart Module Installation
ZWave Plus
™
v2 Assure Lock
®
Models: YRD216, YRD226, YRD256, YRL226, YRL216
If your lock is already installed,
remove the batteries.
Insert the Yale ZWave Plus™ v2
Smart Module into the battery
compartment slot.
Reinsert the batteries.
If you have SmartStart enabled
with your ZWave™ system,
follow in-app prompts to add a
new device. If you do not have
SmartStart or are not sure,
follow the steps below.
3a. Enter your locks master entry
code, followed by the
3b. Press the 7 key followed by
the
3c. Press the 1 key followed by
the
To remove the ZWave Plus™ v2
Smart Module from your system,
open the smart home
or alarm app and follow the
instructions for removing a device.
4a. Enter your locks master entry
code, followed by the
4b. Press the
7 key followed by the
4c. Press the 1 key followed by the
1 2 3 4
Anytime you add or remove a
Smart Module from your lock,
the batteries must be removed
If prompted,
scan QR code

Yale Z-Wave Plus v2 Specifications

General

Brand	Yale
Model	Z-Wave Plus v2
Category	Locks
Language	English