Yamaha 150 - Maintenance; Specifications and Storage

40
Maintenance
EMU31480
Specifications
NOTE:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, “(SUS)” represents the value for
stainless steel propeller installed and “(PL)”
for plastic propeller installed.
EMU28218
Dimension:
Overall length:
823 mm (32.4 in)
Overall width:
577 mm (22.7 in)
Overall height L:
1615 mm (63.6 in)
Overall height X:
1742 mm (68.6 in)
Transom height L:
516 mm (20.3 in)
Transom height X:
642 mm (25.3 in)
Weight (without propeller) X:
194.0 kg (428 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
110.3 kW@5000 r/min (150
HP@5000 r/min)
Idling speed (in neutral):
700 ± 25 r/min
Engine:
Type:
2-stroke V
Displacement:
2596.0 cm
3
(158.41 cu.in)
Bore × stroke:
90.0 × 68.0 mm (3.54 × 2.68 in)
Ignition system:
CDI (micro computer)
Spark plug with resistor (NGK):
BR7HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/SAE):
380.0 A
Min. marine cranking amps (MCA/ABYC):
502.0 A
Min. reserve capacity (RC/SAE):
124 minutes
Alternator output for battery DC:
25.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
1.86 (26/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
M
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. pump octane:
86
Recommended engine oil:
YAMALUBE 2-stroke outboard motor
oil
Lubrication:
Oil injection
Engine oil tank capacity:
0.9 L (0.95 US qt) (0.79 Imp.qt)