9
Specifications and requirements
EMU31480
Specifications
IP:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, “(SUS)” represents the value for
stainless steel propeller installed and “(PL)”
for plastic propeller installed.
EMU2821C
Dimension:
Overall length:
823 mm (32.4 in)
Overall width:
577 mm (22.7 in)
Overall height L:
150FETO 1615 mm (63.6 in)
200FETO 1615 mm (63.6 in)
Overall height X:
1742 mm (68.6 in)
Transom height L:
150FETO 516 mm (20.3 in)
200FETO 516 mm (20.3 in)
Transom height X:
642 mm (25.3 in)
Weight (AL) L:
150FETO 192.0 kg (423 lb)
200FETO 192.0 kg (423 lb)
Weight (AL) X:
150FETO 196.0 kg (432 lb)
175DETO 196.0 kg (432 lb)
200FETO 196.0 kg (432 lb)
Weight (SUS) L:
150FETO 194.0 kg (428 lb)
200FETO 194.0 kg (428 lb)
Weight (SUS) X:
150FETO 198.0 kg (437 lb)
175DETO 198.0 kg (437 lb)
200FETO 198.0 kg (437 lb)
L200FETO 200.0 kg (441 lb)
Performance:
Full throttle operating range:
4500–5500 r/min
Maximum output:
150FETO 110.3 kW@5000 r/min
(150 HP@5000 r/min)
175DETO 128.7 kW@5000 r/min
(175 HP@5000 r/min)
200FETO 147.1 kW@5000 r/min
(200 HP@5000 r/min)
L200FETO 147.1 kW@5000 r/min
(200 HP@5000 r/min)
Idling speed (in neutral):
700
±
25 r/min
Engine:
Type:
2-stroke V
Displacement:
2596.0 cm
3
Bore
×
stroke:
90.0
×
68.0 mm (3.54
×
2.68 in)
Ignition system:
CDI (micro computer)
Spark plug (NGK):
150FETO BR7HS-10
175DETO BR8HS-10
200FETO BR8HS-10
L200FETO BR8HS-10
Spark plug gap:
0.9–1.0 mm (0.035–0.039 in)
Control system:
Remote control
Starting system:
Electric
Starting carburetion system:
Choke valve
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Maximum generator output:
To Next Page
Loading...
