Need help?Do you have a question about the Yamaha 2010 XMAX YP125R and is the answer not in the manual?
General| Cooling System | Liquid-cooled |
|---|---|
| Compression Ratio | 11.0:1 |
| Fuel System | Fuel Injection |
| Ignition System | TCI (Transistor Controlled Ignition) |
| Starter System | Electric |
| Transmission | V-Belt Automatic |
| Front Suspension | Telescopic fork |
| Rear Suspension | Unit Swing |
| Front Tire | 120/70-15 |
| Rear Tire | 140/70-14 |
| Overall Width | 775 mm |
| Overall Height | 1, 385 mm |
| Wheelbase | 1, 545 mm |
| Engine Type | Liquid-cooled, 4-stroke, SOHC |
| Front Brake | Single disc, 267 mm |
| Rear Brake | Single Disc, Ø 240 mm |
Detailed engine parameters including displacement, bore, stroke, fuel, and oil specifications.
Details on voltage, ignition system, ECU, coils, battery, lights, and fuses for the electrical system.
General and specific tightening torque values for fasteners and components.
Detailed engine parameters including displacement, bore, stroke, fuel, and oil specifications for the YP250R.
Details on voltage, ignition system, ECU, coils, battery, lights, and fuses for the electrical system.
Specific tightening torque values for engine and chassis components for the YP250R.
Charts and guidelines for regular maintenance intervals and tasks for emission control and general service.
Procedures for engine checks and adjustments like valve clearance and oil changes for the YP125R.
Procedures for engine checks and adjustments like valve clearance and oil changes for the YP250R.
Procedures for removing, disassembling, checking, and installing front brake components.
Procedures for removing, disassembling, checking, and installing rear brake components.
Procedures for removing, checking, and installing the cylinder head components.
Procedures for removing, checking, and installing the camshaft and rocker arms.
Procedures for removing, checking, and installing valves and valve springs.
Procedures for removing, checking, and installing the cylinder and piston components.
Procedures for removing, disassembling, checking, and assembling the V-belt transmission.
Procedures for removing, checking, and installing the starter clutch and generator.
Procedures for removing, disassembling, checking, and assembling the crankshaft and crankcase.
Procedures for removing, checking, and installing the cylinder head components for the YP250R.
Procedures for removing, checking, and installing the camshaft and rocker arms for the YP250R.
Circuit diagram, ECU self-diagnostic functions, and troubleshooting for the fuel injection system.
Circuit diagram, general information, and troubleshooting for the immobilizer system.
Troubleshooting steps for engine starting issues, covering engine, fuel, and electrical systems.
Troubleshooting steps for engine overheating issues related to cooling and fuel systems.
Troubleshooting steps for issues related to poor braking performance.
To Next Page