3-30
E
EMH60010
CRUISING IN OTHER
CONDITIONS
CRUISING IN SALT WATER
After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
CRUISING IN TURBID WATER
It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
EMG73210
PROCEDURE FOR TILTING DOWN
25-3/30
1) Return the tilt support lever tilting up
the engine slightly.
2) Tilt down the engine.
6L2-9-1K-3 2/17/03 18:40 Page 31
To Next Page
Loading...
