4-23
E
601035
NOTE:
For disposal of used oil consult your
Yamaha dealer.
5) With the outboard motor in an verti-
cal position, using a flexible or pres-
surized filling device, inject outboard
motor hypoid gear oil (SAE 90) into
the oil drain plug hole.
6) When oil begins to flow out of the oil
level plug hole, insert and tighten the
oil level plug.
7) Insert and tighten in the oil drain
plug.
EML22011
CLEANING FUEL TANK
w
Gasoline (petrol) is highly flammable,
and its vapors are flammable and explo-
sive.
8 If you have any question about prop-
erly doing this procedure, consult
your Yamaha dealer.
8 Keep away from sparks, cigarettes,
flames or other sources of ignition
when cleaning the fuel tank.
8 Remove the fuel tank from the boat
before cleaning it. Work only outdoors
in an area with good ventilation.
8 Wipe up any spilled fuel immediately.
8 Reassemble the fuel tank carefully.
Improper assembly can result in a fuel
leak, which could result in a fire or
explosion hazard.
8 Dispose of old gasoline (petrol)accord-
ing to local regulations.
Gear oil capacity:
Refer to SPECIFICATIONS, Page 4-1.
6A1-9-1L 4 4/20/01 11:58 AM Page 24
To Next Page
Loading...
Need help?
General
