EasyManuals Logo

Yamaha Acoustic User Manual

Yamaha Acoustic
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
22
The MAGICSTOMP is equipped with a highly sophisticated Auto Feedback Reduction
function (AFR) to eliminate feedback (howling).
* In this case, “Feedback” is when a specific frequency produced by the amplifier causes the guitar to resonate
uncontrollably, creating a howling sound.
The MAGICSTOMPs AFR function uses a notch filter, which cuts the frequency that is
causing the feedback, to eliminate feedback. A maximum of five notch filters can be set
and operating at the same time.
Auto Feedback Reduction (AFR) Function
How the –, AFR/ON/OFF, + Switches Function
Using the AFR Function
The procedure required for switching the AFR function ON/OFF differs in the Up/Down Mode and in
the Performance Mode.
q When feedback occurs in the Up/Down Mode press the AFR/ON/OFF switch,
and when in the Performance Mode press the switch that corresponds to the
currently selected patch (–, AFR/ON/OFF, +).
The MAGICSTOMP will automatically identify the frequency causing the feedback and activate
an unused notch filter. When the filter identifies the problem frequency, the display will appear
similar to that shown below and then return to its previous condition.
To indicate that the AFR function is active, the AFR/ON/OFF switchs lamp will flash when in the
Up/Down Mode, while in the Performance mode, the switchs lamp (, AFR/ON/OFF, +) for the
currently selected patch will flash.
If the filter fails to be set, the following display is shown before returning to its previous condi-
tion.
U96«Natural
AFR10F=00221Hz
U96«Natural
00CAN'T0DETECT
U011«Natural
ó‡BASSfiMID0áTRE
U95¤OverDrive1
ó‡BLNDfiVOL0áRLVL
The AFR function is active
The AFR function is inactive
The AFR function can only be active when the patchs
effect type is set to AcousticMulti. If the AFR function is
switched ON, the « edit icon will be shown in the display.
Switch operation as described below, will only result in
switching the patch ON/OFF if a patch using another ef-
fect type is selected, or the AFR function is switched OFF
(the ¤ edit icon is displayed) even if the patchs effect type
is set to AcousticMulti.

Other manuals for Yamaha Acoustic

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha Acoustic and is the answer not in the manual?

Yamaha Acoustic Specifications

General IconGeneral
BrandYamaha
ModelAcoustic
CategoryGuitar
LanguageEnglish

Related product manuals