Need help?Do you have a question about the Yamaha AM802 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 8 |
| Inputs | 8 |
| Phantom Power | Yes |
| Inputs - Line | 8 |
| Outputs - Main | 2 |
| EQ Bands | 3-band |
| Aux Sends | 1 |
| Outputs | 2 |
Keep unit away from heat, humidity, dust, and vibration to prevent damage.
Handle unit with care to prevent damage from strong physical shocks.
Do not open case; refer all maintenance to qualified personnel to maintain warranty.
Always turn power OFF before connecting/disconnecting cables to prevent unit damage.
Grip connectors, not cords, when plugging/unplugging cables, including the AC cord.
Clean unit with a soft, dry cloth; avoid solvents like benzine or thinner.
Ensure the power supply voltage matches local AC mains supply for safe operation.
Details the controls on the mixer's front panel, including input channels and master section.
Details the connections and switches available on the mixer's rear panel.
Details MIC/LINE switch, GAIN, CLIP LED, and EQ for input channels.
Covers AUX sends, pan, channel faders, master section, and output controls.
Details all input and output connector types, their specifications, and uses.
Details frequency response and total harmonic distortion specifications.
Covers EQ ranges and crosstalk specifications between channels and I/O.
Describes clip indicators, power requirements, consumption, and physical dimensions.
Lists the mixer's weight and maximum voltage gain for different stages.
To Next Page
