Need help?Do you have a question about the Yamaha CL5 and is the answer not in the manual?
General| Type | Stand mixer |
|---|---|
| Product color | Black |
| Rack mounting | - |
| Video capability | No |
| Frequency range | 20 - 20000 Hz |
| Channels quantity | 80 channels |
| Signal delay (@48kHz) | 2.5 ms |
| Supported sample rates | 44.1, 48 kHz |
| Digital sound processing | - bit |
| USB 2.0 ports quantity | 1 |
| Power consumption (typical) | 170 W |
Weight and Dimensions| Depth | 667 mm |
|---|---|
| Width | 1053 mm |
| Height | 299 mm |
| Weight | 36000 g |
Lists essential safety guidelines for operation.
Guidelines for safe power and device connections.
Introduction to the top panel control sections.
Explains each control within the channel strip.
Details controls for adjusting selected channel parameters.
Describes the touch screen display and Centralogic controls.
Explains fundamental touch screen operations and UI elements.
Describes how to recall settings from libraries.
Detailed steps for recalling and storing library settings.
Procedures for erasing, initializing, and copying settings.
Using the SELECTED CHANNEL section for single channel control.
Managing multiple channels via the Centralogic section.
Information on network setup and Dante technology.
Adjusting screen, LED, and lamp brightness.
Adjusting analog gain for input channels.
Initial steps for connecting devices and setting up Dante.
Setting up input channels, including phantom power and gain.
How to apply EQ, dynamics, and graphic equalizer settings.
Using effects via effect racks with send/return.
How to insert and use Premium Rack processors.
Performing audio recording and playback using a USB flash drive.
Managing unit settings and formatting USB flash drives.
Resetting the unit to its factory default settings.
Addresses issues with power, input signals, and sound output.
To Next Page
