Yamaha BANSHEE - Wheel Removal; Wheel Installation

8-42
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable
stand under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU00871
Wheel installation
When installing the wheel, reverse the
removal procedure.
Tighten the wheel nuts to the specified
torques.
Front
Rear
Tightening torque:
Wheel nut:
Front: 45 Nm (4.5 m0kgf, 32 ft0lbf)
Rear : 45 Nm (4.5 m0kgf, 32 ft0lbf)
5FK-9-17-03 10/3/04 9:36 PM Page 43