Yamaha BANSHEE - Page 52

Position 1: Cold engine start-
ambient temperature below 5°C
(40°F).
Position 2: Cold engine start-
ambient temperature at 0°C
(30°F)–30°C (90°F) and warming
up position.
Position 3: Cold engine start-
ambient temperature above 25°C
(80°F) and warm engine start
position.
6. Completely close the throttle lever and
start the engine by kicking the kick starter.
7. If the engine is started with the starter
(choke) in position 1, the starter (choke)
should be returned to position 2 to warm
up the engine. If the engine is started with
the starter (choke) in position 2, keep the
starter (choke) in this position to warm up
the engine.
8. Continue warming up the engine until it
idles smoothly and return the starter
(choke) to position 3 before riding.
cC
See the “Engine break-in” section prior to
operating engine for the first time.
6-2
e
q
0°
30°
10° 20° 30°
50° 70° 90°°F
°C
AMBIENT TEMP. / STARTER (CHOKE) POSITION
w
eq
w
a
1. Fully open 2. Half open
3. Closed a. Starter (choke)
5FK-9-17-01 3/3/04 10:13 PM Page 50