Need help?Do you have a question about the Yamaha CA-2010 and is the answer not in the manual?
Peak meters, input/output selectors, volume, and balance adjustments.
Connects speakers, turntables (Phono), tuner, and auxiliary devices.
Steps for connecting a turntable, setting selector switches, and ground line.
Controls recording output selection and tape playback connections.
Instructions for copying tapes between two connected tape decks.
Peak meters, input/output selectors, volume, and balance adjustments.
Connects speakers, turntables (Phono), tuner, and auxiliary devices.
Steps for connecting a turntable, setting selector switches, and ground line.
Controls recording output selection and tape playback connections.
Instructions for copying tapes between two connected tape decks.
General| Frequency Response | 5Hz to 100kHz |
|---|---|
| Signal to Noise Ratio | 110dB (CD) |
| Channel Separation | 70dB (1kHz) |
| Output | Speaker A, B, A+B |
| Speaker Load Impedance | 4-16 ohms |
To Next Page
