Need help?Do you have a question about the Yamaha CA-1000 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Frequency Response | 10Hz to 50kHz |
| Total Harmonic Distortion | 0.1% |
| Signal to Noise Ratio | 90dB (line) |
| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
| Signal to Noise Ratio (mic) | 70 dB |
| Speaker Load Impedance | 4Ω to 16Ω |
| Signal to Noise Ratio (MM) | 80dB (MM) |
| Channel Separation | 50 dB (1 kHz) |
| Power Output | 70 watts per channel (8 ohms, 1 kHz) |
To Next Page
