Need help?Do you have a question about the Yamaha CA-610 II and is the answer not in the manual?
General| Frequency Response | 10Hz to 50kHz |
|---|---|
| Total Harmonic Distortion | 0.05% |
| Input Sensitivity | 2.5mV (MM), 150mV (Line) |
| Weight | 11.5 kg |
| Speaker Load Impedance | 4Ω to 16Ω |
| Type | Stereo Integrated Amplifier |
| Damping Factor | 40 |
| Signal to Noise Ratio | 95dB (Line) |
| Channel Separation | 60dB (line) |
| Output | 150mV (line) |
Detailed view of the top side of the unit, identifying components.
Detailed view of the bottom side of the unit, identifying components.
Description of the front panel controls, switches, and indicators.
Description of the rear panel connections and inputs/outputs.
Instructions for safely removing the main cabinet.
Procedure for removing the bottom cover of the unit.
Steps to remove the front panel and its associated controls.
Guide for removing the tone control circuit board.
Procedure for removing the main amplifier section circuit board.
Steps to detach the function circuit board from the unit.
Adjustments for the main amplifier section, including idling current.
Procedure for adjusting the accuracy of the output level meters.
To Next Page
