Yamaha Clavinova CLP-270 User Manual

EN
CLP-280/270
OWNER'S MANUAL
Before using the Clavinova, be sure to read “PRECAUTIONS„ on pages 3-4.
IMPORTANT
—Check your power supply—
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas
a voltage selector may be provided on the rear of the main keyboard unit near the power cord. Make sure that the voltage
selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the
setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.

Yamaha Clavinova CLP-270 Specifications

General

Number of Keys	88
Touch Sensitivity	Hard, Medium, Soft, Fixed
Sound Source	AWM (Advanced Wave Memory) Stereo Sampling
Polyphony	128-note
Amplifiers	40W x 2
Speakers	16cm x 2 + 5cm x 2
MIDI Compatibility	Yes
USB Connectivity	No
Keyboard	GH3 (Graded Hammer 3)
Effects	Reverb, Chorus, DSP
Pedals	Sostenuto, Soft
Included Accessories	Bench