Why do Metronome, MIDI Song or Rhythm goes out of tempo slightly when I play the keyboard on my Yamaha Clavinova CLP-735 Musical Instrument?
This can occur infrequently when Grand Expression Modeling is set to “Dynamic.” If this happens, set Grand Expression Modeling to “Static”.
What to do if my Bluetooth-equipped smart device cannot be paired with nor connected to the Yamaha Clavinova CLP-735?
First, check the Bluetooth function of the smart device is activated. The smart device and the instrument need to be paired so that the instrument receives audio data from the smart device via Bluetooth. In case there is a device (microwave oven, wireless LAN device, etc.) that outputs signals in the 2.4 GHz frequency band nearby, move this instrument away from the device that is emitting radio-frequency signals.
How to fix Rhythm not starting on my Yamaha Musical Instrument?
“SynchStart” setting is on. Set “SynchStart” off in the “Metronome/Rhythm” menu display.
Why is the menu display not showing up on my Yamaha Clavinova CLP-735 Musical Instrument?
When Song is being played back, menu display other than “Voice” menu and “Song” menu will not appear. Stop the Song by pressing the [PLAY/PAUSE] button. Also, in the recording ready mode, only “Recording” menu display will appear.
Why is the keyboard sound output from only one speaker in Duo mode on my Yamaha Musical Instrument?
This is because the default pan setting differs depending on the Voice. Change the settings of “Duo-Type” from “Separated” to “Balanced,” or change the “Pan” settings.
How to resolve Yamaha Clavinova CLP-735 performance not being recorded in Dual/Split/Duo mode?
Switching to Dual/Split/Duo mode in the middle of the Song is not recorded. Also, the recording part for the Voice 2 (Dual mode) or the left Voice (Split/Duo mode) is automatically assigned. If the assigned part already has data, the data will be overwritten and deleted when you record.
What to do if (CLP-785, CLP-795GP) on/off setting of pedal connected to AUX PEDAL jack is reversed on my Yamaha Clavinova CLP-735?
Set to the appropriate parameter via the “System” menu display: “Pedal” ? “Aux Polarity”.
What to do if the contents of the Wireless LAN is not shown in the display even though the USB wireless LAN adaptor is connected to my Yamaha Clavinova CLP-735 Musical Instrument?
Disconnect the USB wireless LAN adaptor and connect it again.
What to do if the Song title is not correct on my Yamaha Clavinova CLP-735 Musical Instrument?
The “Language” setting may be different than that is selected when you named the Song. Set the “Language” parameter via the “System” menu display: “Utility” ? “Language” ? “Song” to change the setting. However, if the Song was recorded on another instrument, changing the “Language” parameter setting may not resolve the problem.
Why is the overall volume low or no sound heard on my Yamaha Musical Instrument?
There could be several reasons for low or no sound. The Master Volume might be set too low; adjust it to an appropriate level using the [MASTER VOLUME] slider. The keyboard performance volume might be too low; adjust the volume balance via the “Song” menu display: “Volume” ? “Song - Keyboard”. If headphones or adaptor plugs are connected when the Speaker setting is “Normal,” disconnect them. Also, check if the Speaker setting is “Off” and set it to “Normal” via the “System” menu display: “Utility” ? “Speaker”. Finally, ensure that Local Control is “On” via the “System” menu display: “MIDI” ? “Local Control”.
General| Polyphony | 256 |
|---|---|
| Voices | 38 |
| Amplifiers | 30 W x 2 |
| Speakers | 16 cm x 2 |
| Headphone Jacks | 2 |
| MIDI Recorder | Yes |
| Keyboard | 88-key keyboard with synthetic ebony and ivory keytops |
| Sound Engine | Yamaha CFX and Bösendorfer Imperial samples |
| Display | LCD screen |
| Weight | 57kg |
| Connectivity | USB TO HOST, USB TO DEVICE, MIDI In/Out, AUX In/Out |
| Bluetooth | Audio |
| Effects | Reverb, Brilliance |
| Audio Recorder | Yes |
| Finish | Rosewood, Black Walnut, Polished Ebony, White |
To Next Page