Why is the overall volume low, or why is no sound heard from my Yamaha Clavinova CVP-202?
The low overall volume or absence of sound from your Yamaha Clavinova may be due to several reasons. First, check if the [MASTER VOLUME] is set too low and increase it. Second, ensure that headphones are not connected, as they will mute the speakers. Finally, verify that the Local Control function is turned on.
Why is the keyboard volume low compared to the auto accompaniment on my Yamaha Musical Instrument?
If the keyboard volume is too low compared to the auto accompaniment, it may be because the overall keyboard volume or the keyboard part's independent volume level is set too low. Try increasing the overall keyboard level or use the VOLUME function in the appropriate KEYBOARD display to raise the volume of the keyboard part.
Why is the volume of auto accompaniment low on my Yamaha Clavinova CVP-202 Musical Instrument?
If the Auto Accompaniment or song playback volume is too low compared to the keyboard, it could be because the [ACMP/SONG VOLUME] is set too low. Increase the [ACMP/SONG VOLUME] level. Alternatively, the volume level of one or more accompaniment parts or song tracks may be set too low. In this case, raise the part or track levels in the appropriate MIXER display.
What to do if the maximum of 60 songs cannot be recorded on Yamaha Clavinova CVP-202 Musical Instrument?
If you cannot record the maximum of 60 songs, the memory capacity is likely full because the playing time of existing songs is too long, or many functions were used. Delete unnecessary songs or record to a new disk.
Why does the desired chord is not recognized by my Yamaha Clavinova CVP-202?
If the desired chord is not recognized by the Auto Accomiment, the keys are not being played correctly, or the keys are not being played according to the selected accompaniment mode.
How to fix the display if it is too bright or too dark on my Yamaha Musical Instrument?
If the display is too bright or dark, it might be affected by the surrounding temperature. Adjust the contrast of the display using the [CONTRAST] control.
What does it mean if a click or pop is heard when the power is turned on or off on Yamaha Musical Instrument?
A click or pop sound when turning the power on or off is normal, as electrical current is being applied to the instrument. This is no cause for concern.
General| Type | Digital Piano |
|---|---|
| Number of Keys | 88 |
| Polyphony | 64 |
| Sound Source | AWM (Advanced Wave Memory) |
| Display | LCD |
| Amplifier | 40W x 2 |
| Effects | Reverb, Chorus |
| Recorder | 16-track |
| Connectivity | MIDI, USB to Host |
| Keyboard | Graded Hammer Standard |
| Touch Sensitivity | Hard, Medium, Soft, Fixed |
| Speakers | 12cm x 2 + 5cm x 2 |
To Next Page
