Yamaha CRD-HD1300 - User Manual

There are two types of CDR-HD1300; one equipped with a
hard disc drive and the other without it depending on
market areas.
CDR-HD1300E is equipped with a hard disc drive.
CDR-HD1300/CDR-HD1300E
CDR-HD1300には販売地域によりハードディスクドライブ
が搭載されているものと、搭載されていないものがありま
す。
CDR-HD1300Eにはハードディスクドライブが搭載されて
います。
100813
P.O.Box 1, Hamamatsu, Japan
■ CONTENTS
TO SERVICE PERSONNEL ...................................... 2~3
PREVENTION OF ELECTRO STATIC DISCHARGE ... 4
FRONT PANELS ............................................................ 5
REAR PANELS .......................................................... 5~6
REMOTE CONTROL PANELS ...................................... 7
SPECIFICATIONS.......................................................... 7
INTERNAL VIEW ........................................................... 8
DISASSEMBLY PROCEDURE / 分解手順 .............. 9~15
SERVICE CHECK PROCEDURES /
サービスチェック手順 ............................................ 16~19
INSPECTIONS/検査 ............................................. 20~25
FIRMWARE UPDATE / ファームウエアの更新 .. 26~27
FORMATTING THE HDD / HDDのフォーマット ........ 27
Entering ID to main P.C.B. /
メインPCBへのID書き込み .................................... 28~29
DISPLAY DATA ..................................................... 30~31
IC DATA ................................................................. 32~39
BLOCK DIAGRAM ....................................................... 40
PRINTED CIRCUIT BOARD .................................. 41~44
SCHEMATIC DIAGRAM ........................................ 45~49
PARTS LIST ........................................................... 50~67
REMOTE CONTROL.................................................... 68
Parts List for Carbon Resistors ................................ 69
SERVICE MANUAL
HDD/CD RECORDER
CDR-HD1300/CDR-HD1300E
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

Summary

To Service Personnel

Laser Safety Precautions

Safety measures to prevent eye and skin exposure to laser radiation.

Electrostatic Discharge Prevention (ESD)

ESD Grounding Procedures

Techniques for grounding human body and work tables to prevent ESD.

Technical Specifications

Disassembly Procedures

CDR Mechanical Unit Replacement

Procedure for replacing the CDR mechanical unit, including notes on serial numbers and parts.

Top Cover Removal

Front Panel Unit Removal

HDD Replacement Procedure

HDD Replacement Steps

Steps for loosening HDD slot door, disconnecting cables, and removing HDD tray.

PCB Operation Checks

Sub-chassis Unit Lifting and Cable Disconnection

Sub-chassis Unit Removal

Service Check Procedures

Troubleshooting: Main Unit Non-Operation

Flowchart and checks for when the main unit does not operate.

Troubleshooting: MAIN PCB Defects

Troubleshooting steps for MAIN PCB based on its three functional blocks.

Troubleshooting: ATAPI Device Defects

CD Player Mode Operation

ACDR2 Check Procedures

ACDR2 Operation Check

Checking ACDR2 operation using PCB test modes (1, 2, and 3).

PCB Test Mode Startup

Steps to initiate the PCB test mode, including power and shorting pins.

PCB Test Mode 1 Operation Check

Inspections and Required Instruments

Inspection Instruments Required

List of instruments and test discs required for inspections.

Inspection Step 1: Display Check

Inspection Step 2: D;A Converter Check

Inspection Step 3: AD;DAC Mode Check

Firmware Update Procedures

Firmware Update Overview

Information on why firmware update is necessary after component replacement.

Firmware Version Confirmation

Steps to check system control and CD-R/W drive firmware versions.

Firmware Update Steps

Detailed steps for updating firmware using the firmware CD-R.

HDD Formatting Procedures

Formatting New HDD

Procedure for formatting a newly installed HDD.

Formatting Used HDD

Procedure for formatting an HDD previously used with another unit.

Entering ID to Main PCB

Main PCB ID Entry Requirement

Requirement to enter ID after replacing MAIN PCB or IC11.

Static Electricity Measures for ID Entry

Required Tools for ID Entry

Jig Installation Procedure

System Block Diagram

Schematic Diagrams

Parts Lists Overview

Electrical Parts List

Mechanical Parts List

Yamaha CRD-HD1300 Specifications

General

Brand	Yamaha
Model	CRD-HD1300
Category	Recording Equipment
Language	English