82
At this point, audio from the Bluetooth connected device will be redirected onto
the CS-700 speakers, and automatically mixed with other audio sources
connected to CS-700, such as USB-based audio. Audio in from the MIC array
will be redirected to the mobile device.
The Bluetooth connection will remain engaged until any of several actions
occurs:
• The User deactivates the connection from the mobile device.
• The User moves out of range of the Bluetooth signal.
• The User ceases to transfer data over the connection, and a connection
timeout occurs.
Note: the connection timeout is a configurable parameter, set either through
Web-UI or a configuration file. When set to 0, the connection will never drop
from data inactivity.
Aux-IN Audio Support
To utilize the CS-700 as a room speaker system such as for the display in TV
mode, connect your source of audio via a standard 3.5mm stereo jack
connector on the back of the unit. Gain is automatically adjusted by default
and the Volume Up/Down controls will manage the sound level. Gain can be
manually set as well, configurable through the Web-UI, the Service Application,
or from a configuration file.
To Next Page
