Need help?Do you have a question about the Yamaha CX-600 and is the answer not in the manual?
Explains the meaning of warning symbols used in the manual regarding electrical shock and important instructions.
Describes different regional models of the CX-600/U, noting variations in AC outlets and voltage selectors.
Explains how to set the voltage selector on the rear panel for the local power supply (110/120V or 220/240V).
Detailed explanations of the operation and function of each front panel control, including power, volume, input selection, and tone controls.
Guide for connecting the unit's PRE OUT jacks to the power amplifier's INPUT jacks.
Instructions for connecting turntable output and ground wire to the PHONO jacks for optimal sound.
Connecting CD, Tuner, DAT, CDV, VCR/Tape decks, and video sources to the appropriate input jacks.
Step-by-step guide for operating the unit for audio playback and video monitoring.
How to use the loudness control to optimize sound balance at low listening volumes.
Procedures for recording audio sources and video signals using connected decks.
Instructions for copying audio or video tapes between connected decks.
Explanation of the power, input selector, and playback keys on the remote transmitter.
Details specific functions for CD, TAPE, and Volume controls on the remote.
Instructions for installing batteries into the remote control transmitter.
Information on the remote's effective operating distance and aiming requirements.
Guidance on replacing weak or depleted batteries in the remote control.
To Next Page
General
