Yamaha CX-1 User Manual

CX-1
CX-2
OWNER’S MANUAL
CONTENTS
Safety Instructions ..................... 2
Features ................................... 3
Supplied Accessories ................ 3
Connections ............................. 4
Operations ............................... 7
Remote Control Transmitter ...... 11
Specifications ......................... 16
Troubleshooting ...................... 18
Natural Sound Stereo Pre-Amplifier
IMPORTANT!
Please record the serial number of this unit in
the space below.
Model:
Serial No.:
The serial number is located on the rear of the
unit.
Retain this Owner’s Manual in a safe place for
future reference.

Yamaha CX-1 Specifications

General

Type	Stereo Preamplifier
Input Sensitivity (MM)	2.5mV
Input Sensitivity (line)	150mV
Output (Pre out)	1V
Inputs	Phono MM, Tape 1, Tape 2
Outputs	Tape (2), Pre out

Summary

SAFETY INSTRUCTIONS

General Safety Precautions

Detailed list of safety instructions for operating the unit.

Connections and Setup

CX-1 Connection Diagram

Illustrates how to connect various audio components to the CX-1 model.

CX-2 Connections

CX-2 Connection Diagram

Shows how to connect audio and video components to the CX-2 model.

Advanced Connections

S-Video and Composite Connections (CX-2)

Rear Panel Component Functions

Explains AC outlets, PHONO switch, CARTRIDGE LOAD, and REMOTE CONTROL connector.

Operations - Playing Sources

Selecting and Playing Audio

Step-by-step guide for selecting and playing audio sources.

Operations - Recording

Recording to Tape or Dubbing

Instructions for recording audio from one source to tape or dubbing between tapes.

Operations - Tape Dubbing

REC OUT Selector for Dubbing

Details how to set the REC OUT selector for different dubbing scenarios.

Remote Control Transmitter

Battery Installation and Replacement

Remote Control Key Functions

CX-1 Key Functions Overview

Details the key functions for the CX-1 remote control.

CX-2 Key Functions Overview

Explains the key functions for the CX-2 remote control.

Remote Learning Process (CX-2)

How to Learn New Functions

Step-by-step guide for programming new functions into the remote.

Learning Troubleshooting and Notes

Troubleshooting

Power and Sound Issues

Solutions for unit not turning on, no sound/picture, or one-sided sound.

Noise and Volume Problems

Tone Control & Remote Issues