Why won't my Yamaha Amplifier power on?
The Yamaha Amplifier might not turn on because the protection circuitry has been activated three times consecutively, disabling the power as a safety precaution. In this case, contact your nearest Yamaha dealer or service center to request repair.
How to disable auto standby on Yamaha Amplifier?
Your Yamaha Amplifier might be entering standby mode automatically because the auto-standby function is enabled. To disable it, set the AUTO POWER STANDBY switch to “OFF”.
What to do if Yamaha CX-A5200 Amplifier has no sound from a specific speaker?
If no sound is coming from a specific speaker connected to your Yamaha Amplifier, and the speakers are connected to the CH.3 A/B terminals, press SPEAKERS A/B to turn on the speakers. If this doesn't solve the problem, the XLR balanced cable (or RCA unbalanced cable) connecting the unit and pre-amplifier may be defective, or the speaker cable connecting the unit and speaker may be defective. If there is no problem with the connection, replace with another cable.
Why is another channel's sound coming from a specific speaker on my Yamaha CX-A5200?
Another channel's sound might be coming from a specific speaker on your Yamaha Amplifier because the CH SELECTOR setting is incorrect. Change the CH SELECTOR setting so that it matches your speaker system.
General| Channels | 11.2 |
|---|---|
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Auro-3D | Yes |
| HDMI Inputs | 7 |
| HDMI Outputs | 3 |
| HDCP Version | 2.2 |
| 4K Ultra HD Support | Yes |
| HDR10 | Yes |
| Dolby Vision | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| AirPlay 2 | Yes |
| MusicCast | Yes |
| Type | AV Preamplifier |
| HDR Support | HDR10, Dolby Vision, HLG |
| eARC | Yes |
| Phono Input | Yes |
| Dimensions (W x H x D) | 435 x 192 x 474 mm |
| Weight | 15.2 kg |
| Amplifier Type | Preamplifier |
| Signal-to-Noise Ratio | 110 dB |
| Input Sensitivity | 200 mV / 47 k-ohms |
| HDMI Version | 2.1 |
| Ethernet | Yes |
| USB Port | Yes |
| Maximum Output | N/A (Preamplifier) |
| Frequency Response | 10 Hz-100 kHz +0/-3 dB |
Lists items supplied with the product.
Explains the manual's scope and conventions.
Explains the use of the supplied remote control.
Describes the unit's primary functions and uses.
Details Yamaha's sound field technology for immersive audio.
Explains automatic calibration system for optimizing sound.
Highlights the unit's high-quality audio and video performance.
Discusses the unit's expandability and connectivity options.
Covers applications like AV CONTROLLER and MusicCast.
Identifies and explains the unit's various parts and controls.
Outlines the overall steps for setting up the unit.
Provides guidance on speaker placement for optimal sound.
Details how to connect amplifiers and subwoofers.
Explains how to connect TVs and playback devices.
Instructions for connecting FM/AM and DAB/FM antennas.
Covers network connection setup for internet and streaming.
Details connections for analog multichannel and trigger function devices.
Explains how to connect the power cable.
Guides users on setting the display language.
Manual speaker configuration before auto-calibration.
Automatic speaker setup and optimization using YPAO.
Wireless network connection setup.
Setting up the MusicCast network.
General steps for starting playback.
Using SCENE function for quick setup of favorite settings.
How to choose different sound modes for playback.
Streaming music wirelessly from Bluetooth devices.
Playing music files from USB drives.
Accessing music from network storage devices.
Accessing and playing Internet radio stations.
Streaming music from Apple devices using AirPlay.
Managing audio/video playback across different rooms.
Adjusting playback settings via the Option menu.
Overview of the Setup menu for configuring functions.
Advanced system configuration via the ADVANCED SETUP menu.
Instructions for updating firmware over the network.
Solutions for common problems and error indications.
Lists compatible devices and file types for playback.
Describes the connectors and ports on the rear of the unit.
Details the functions and layout of the remote control.
Explains the role and function of each type of speaker in a surround system.
Provides guidance on speaker placement for optimal sound.
Describes layout options for front/rear presence speakers for 3D sound.
Explains the use of HDMI jacks for video and audio transmission.
For transmitting analog stereo audio signals.
For transmitting analog audio signals using balanced XLR cables.
How to connect an external power amplifier to the unit.
Details connecting subwoofers, including phase and layout settings.
How to connect a TV for video output and audio input.
Connects video sources like players and consoles.
Connects audio sources like CD players and turntables.
Connects the unit to a router using a network cable.
Positions the wireless antenna for optimal signal reception.
Guides users on setting the display language.
Automatic speaker setup and optimization using YPAO.
How to view the results of the YPAO measurement.
Configures HDMI control settings for device operation.
Enables/disables Audio Return Channel (ARC) when HDMI Control is On.
Selects the method for connecting to a network.
Configures network parameters like IP address.
Enables/disables the Bluetooth function.
Configures Bluetooth audio receiver settings.
Configures Zone2 and Zone3 settings.
Assigns COMPONENT VIDEO, COAXIAL, and OPTICAL jacks to other input sources.
Updates the unit's firmware for new features or improvements.
Troubleshooting common issues related to power, system, and remote control.
Troubleshooting audio-related problems and their causes/solutions.
Troubleshooting video-related problems and their causes/solutions.
Troubleshooting Bluetooth connection and audio playback issues.
Yamaha's DSP technology for movie theater sound experience.
Yamaha's automatic calibration system for optimizing sound.
Information about supported Bluetooth, USB, and AirPlay devices.
Information about supported audio and video file formats.
Technical specifications of the AV receiver.
To Next Page
