11
SPECIFICATION
The following is a list of the main specifications changes that the Mark III series introduces (as com-
pared to the MARK II XG series).
1. Built-in speakers
2. Built-in CD-ROM drive (on full-function models only)
3. New controller (DKC55 or DKC5RCD)
4. Internal memory equivalent to 16MB EMK1
5. New 1-beam continuous key sensor (on full-function models only)
6. No hammer sensor (models DGH1A to DC2A)
7. New 16MB piano tone generator
8. CTRL sheet, PK-CTL sheet, and sensor sheet all have rewritable programs
9. New shank-stopper quick-escapement mechanism (all models except DGA1)
10. Smart key functionality (on full-function models only)
Playback only Playback only + Silent Keyrecord & Play + S
Hammer Record &
Play + S
Piano Type DGA1 DGP1
DA1A, DGH1BA
DC1A, DC2A
DC3A-DC7A
Control
Compact Type (DKC55) Compact Type (DKC55) Compact (DKC55RCD) Compact (DKC55RCD)
CD drive CD drive
EMK 16MB EMK 16MB EMK 16MB EMK 16MB
Calendar Calendar Calendar Calendar
Drive
High Power High Power High Power High Power
Key Solenoid Key Solenoid Key Solenoid Key Solenoid
Sensor
No No Continuous KeySensor Continuous KeySensor
Hammer Sensor
Silent No Stopper + New QE/MD Stopper + New QE/MD Stopper + New QE/MD
Tone Generator
DB51XG (32ch) DB51XG (32ch) DB51XG (32ch) DB51XG (32ch)
New Piano TG
(16MB64ch)
New Piano TG
(16MB64ch)
New Piano TG
(16MB64ch)
Amp/Speaker
2way 2way 2way 2way
60W ×
2 60W × 2 60W × 2 60W × 2
etc
Smart Key Smart Key
AUX Phone Jack AUX Phone Jack AUX Phone Jack AUX Phone Jack
Tone Control Tone Control Tone Control Tone Control
MIDI in/out MIDI in/out MIDI in/out MIDI in/out
To Next Page
Loading...
