Yamaha disklavier DKC55 - Comprehensive Disklavier Test Modes; Control Unit and Associated Tests; Sensor Sheet and Related Tests

36
8. Display EEP-ROM data (on the PK-CTL board)
* MAINTENANCE *
*** MODE GP **
*** DISPLAY ****
* EEP ROM DATA *
EEP ADDRESS=0000
00 00 00 00
END!
* MAINTENANCE *
*** MODE GP ***
+
Power
00
R
09
09
09
00
9 times
The EEP-ROM on the PK-CTL board stores the following data:
* Key board play back table
* Pedal playback table
* Temperature compensation table (keyboard)
* Minimum pressure adjustment table (keyboard)
* MIDI set up parameter value
* Error history
This data remains stored even when the Power is turned off.
Keyboard
Address for the EEP-ROM
(0000 ~ 1FFC)
Select button
Select button
a: The data addressed above
b: The next data of address a
c: The next data of address b
d: The next data of address c
EEP ADDRESS=0000
00 00 00 00
+–
a
b
c
d
Data Display:
9. Pedal PLA
Y/REC mode
* MAINTENANCE *
*** MODE GP **
*** PEDAL ****
* PLAY/REC MODE *
PEDAL MODE
LOUD=HP SOFT=HP
END!
* MAINTENANCE *
*** MODE GP ***
+
Power
00
R
10
10
DRIVE
10
00
An emergency mode to change to the switch pedal mode, in order to retain
pedal operation if the half playback does not function, due to a problem.
Switching operation of HP/SW:
: Memorize the displayed data
Playback Models
: Quit without memorizing
+
/YES
–/NO
for LOUD for SOFT
DRIVE
10 times
Playback Models