The Disklavier Design
The Disklavier consists of a control unit and a drive unit comprising of a sensor unit, solenoid
units, power source unit and I/O control unit.
Specifications
Design
Control unit
Solenoid unit
Sensor unit
Power supply
• Key switches
• LCD
• LED indicators
• LED display
• Disk drive
• Jacks
• Media
• Polyphonic voices
• Polyphonic voices
• U.S. & Canadian Models:
• General Model:
• Power consumption
• Environmental temperature:
Standard equipment
18
Dot matrix (16 characters x 2 lines)
Power, Record, Volume, Tempo,
Transposition, Metronome, MIDI.
7 segments x 2 digits
3.5 inch micro-floppy disk drive
MIDI IN/OUT, foot switch phone jack
Double sided, double density, double track
3.5 inch microfloppy disks
Memory capacity: 628 kbytes
Number of pieces: 60
Music titles: 32 characters
Disk titles: 64 characters
16
16
120V
- 60 Hz
220V - 50Hz
250 W
4°C ~ 40°C
Wireless remote control unit, prerecorded floppy disk
* Specifications and exterior design are subject to change without notice.
1
To Next Page