Yamaha DM2000 Supplementary Guide

2
DAW Control Regardless of Layer
Selection
Previously, the transport controls, locator, track
arming functions, and shuttle and scrub could be
used to control an external DAW only when a
Remote Layer was selected. With the new DAW
CONTROL option, a DAW can be controlled
regardless of which Layer is currently selected.
The new MACHINE CONTROL and DAW CON-
TROL options have been added to the following five
pages: Machine Configuration and Locate Memory,
which are selected by using the LOCATOR [DIS-
PLAY] button, and Track Arming Group, MTR
Tr ack Arming Configuration, and Master Track
Arming Configuration, which are selected by using
the TRACK ARMING [DISPLAY] button.
When the MACHINE CONTROL option is on,
external MMC/P2 machines can be controlled,
except when a DAW Remote layer is selected, in
which case the DAW is controlled. When the DAW
CONTROL option is on, the DAW can be controlled
regardless of which Layer is currently selected.

Yamaha DM2000 Specifications

General

Type	Digital Mixing Console
Channels	96
Sampling Rate	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Bit Depth	24-bit
Aux Sends	12
Matrix	8 x 8
EQ Bands	4-band parametric
Word Clock	Yes
Effects	Internal Effects Processors
Digital I/O	AES/EBU, ADAT
Display	LCD