Yamaha DR100 - Page 4

FEATURES
e Due to digital processing the 4 integrated reverb programs offer a natural, high-
grade reverb sound. Preset reverb programs are called up by one-touch operation.
е
A
MIX
control
allows
exact
balance
adjustments
between
source
sound
and
effect
sound.
e A 3-band equalizer permits minute response adjustments.
e [he output signal can be switched between reverb and normal sound by pressing
an integrated BYPASS switch, while a REV ON/OFF switch determines whether
signals from the rear panel LINE INPUT pass through the reverb circuit or not.
e Besides the MIC/INST input jack on the front panel the DR100 offers LINE input
jacks on the rear panel, which can be used at the same time. By pressing the REV
button OFF the signals from the rear input bypass the reverb unit and the reverb
effect applies only to the front input signals, ideal for playing along with record-
ings, CDs etc.
e LINE INPUT and OUTPUT are both equipped with RCA pin jacks and phone jacks.
LEVEL switches allow switching of the input level between 20 dB and -10 dB for
connecting a wide range of devices, allowing many applications like PA, recording,
audio reproduction etc.
e Due to its compact half-rack size and light weight the DR100 fits anywhere and is
easy to transport.