Yamaha DTX400 Series User Manual (English)

To Next Page

DTX400 Series Firmware Update Guide 1

DTX400 Series

Firmware Update Guide

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX400K/430K/450K Drum Trigger Module

(hereinafter called "DTX400"), and provides the update history.

■Special Notices

・ This updater is designed for use with the DTX400, earlier than version 1.11.

・ This updater is to be used at the user’s own risk.

・ A computer running one of the following operating systems is required for this update:

Windows7 32bit/64bit、Windows8.1 32bit/64bit、Windows 10 32bit/64bit

・ The update will take several minutes. Please ensure that your computer does not enter Sleep mode

during this time.

・ During the update, do not launch or operate any applications other than the updater on your computer.

・ DO NOT power off or disconnect the cable from the product during the updating process. The DTX400

may become inoperable.

・ If the update fails, and the DTX400 still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・ The company names and product names in this document are the trademarks or registered trademarks

of their respective companies.

Need help?

Do you have a question about the Yamaha DTX400 Series and is the answer not in the manual?

Yamaha DTX400 Series Specifications

General

Type	Electronic Drum Kit
Module	DTX400
Drum Kits	10 Preset Kits
Metronome	Yes
Power Supply	PA-130 or Equivalent
Voices	169 Voices
Training Functions	10
Pedals	Hi-Hat Controller, Bass Drum Pedal
Connectivity	USB, AUX IN, HEADPHONES OUT
Pads	1 Snare, 3 Toms, 1 Kick, 1 Hi-Hat, 1 Crash