Why Yamaha Outboard Motor gauge operates unstably?
If the gauge operates unstably, it could be because a resistor is not connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs.
How to fix Yamaha E48CMH Outboard Motor trim gauge showing incorrect position?
If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sender could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sender.
Why Yamaha E48CMH Speedometer or Comb. Speedometer & Fuel mgt gauge shows incorrect fuel level?
If the speedometer or combination speedometer & fuel management gauge shows an incorrect fuel level, the fuel sensor selection is likely wrong. Set up the fuel sensor to the correct resistance.
What to do if Yamaha E48CMH Outboard Motor gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
What causes Yamaha Outboard Motor fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
How to fix Yamaha E48CMH tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
Why Yamaha E48CMH illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
What to do if Yamaha Outboard Motor fuel management gauge shows incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition might be wrong (especially for multi-applications). To fix this, default the engine number and turn the key switch on in order from the portside engine to re-memorize each engine number.
What does it mean when my Yamaha E48CMH gauge shows “----”?
General| Brand | Yamaha |
|---|---|
| Model | E48CMH |
| Category | Outboard Motor |
| Language | English |
Step-by-step guide for safely removing the outboard motor from its steel frame crate.
Instructions and guidelines for correctly mounting the outboard motor onto the boat transom.
Guidance on correctly installing the remote oil tank, including dimensions and notices.
Description of throttle control systems (Push To Open/Pull To Open) and remote control box types.
Details on combination and independent switch panels, including emergency stop and PTT switches.
Guidance on selecting and routing remote control cables, including length calculations.
Information on attachment kits, including general torque table and part numbers for various models.
Details on main wire harnesses and dual station wire harnesses for DEC systems.
Description of the multi-function tiller handle and its electrical functions.
Contents and part numbers for the multi-function tiller handle kit for US models.
Contents and part numbers for the multi-function tiller handle kit for Japanese models.
Contents and part numbers for the multi-function tiller handle kit for EU & ANZ models.
Procedures for mounting gauges, including analog gauge illumination and fitting details.
Applications and descriptions for analog tachometers, including models and indicators.
Applications and dimensions for digital tachometers, including setup instructions.
Types and applications of speedometers, covering digital and analog models.
Functions, applications, and kit contents for the fuel management gauge.
Applications, dimensions, and adjustment procedures for analog trim meters.
Applications, dimensions, and installation of coolant pressure meters.
Applications, dimensions, and installation of coolant temperature meters.
Common troubleshooting steps for gauge issues, including causes and measures.
To Next Page
